Ingame Contrast Issues [LVM-37W3]

RandysWay

[H]ard|Gawd
Joined
Mar 5, 2004
Messages
1,595
I just picked up my Westinghouse 37" LVM-37W3 the other day for a mere $500 bucks, and I didn't have this issue before with my NEC CRT monitor..

The contrast seems to be overly boosted in 3D games. It's so high that, say in Battlefield 2, the sky is so bright that the HUD disappears against it. Or, in NFS ProStreet, all of the menus are pure white with the text being barely readable. It's definitely a software issue, Brightness/Contrast through the LCD panel's menu doesn't affect this. Take this for an example: Go into your Color Corrections in the Catalyst Control Center and change your Desktop Contrast from the default 100 to 200. See how much contrast there is? This is how it is ingame. I've tried to change the brightness/contrast under the Color Corrections for "Full Screen 3D" but it doesn't change a thing.

Anybody have any ideas? I thought it was a driver issue so I upgraded to the latest ATI 8.2, but it's still the same thing. Also, on a side note, is it possible to go further than 60Hz at resolutions such as 1024x768 on this monitor? Doesn't seem to let me..

Thank you,
-R
 
Most games have an in-game options menu when you can configure graphic settings. Try reducing the Gamma values until the picture is more to your taste.
 
Most games have an in-game options menu when you can configure graphic settings. Try reducing the Gamma values until the picture is more to your taste.

Yeah, I know... and ProStreet/Battlefield 2, using my earlier examples, lack any kind of ingame Gamma adjustments..

But, regardless, it's not game specific.. it's the same overexposed image across any 3D game.. so something is definitely not set right..

Thanks,
-R
 
I stumbled upon something on accident..

I was changing resolutions in Test Drive 4, and after the resolution changed I noticed that the 37" Westinghouse was going through it's little Auto Configuration.. but what I saw while it was positioning the image on the screen is that it was switching between a normal picture and a picture with way too much contrast. It ended up on the picture with way too much contrast. So, I navigated through the menus and hit Auto Adjust.. it went through it's routine again, but landed on the same picture with way too much contrast. So much contrast that a medium gray is pure white.

So I hit the input shortcuts on the bottom of the remote - I switched to a different input (say, HDMI or Video) then immediately went back to the "PC" input - the contrast was perfect and normal. If I ALT+Tab back into Windows then go back into a game - it goes through it's Auto Configuration routine again and lands back on way too much contrast. Cycling between an input will again solve it.

So, what in the heck could cause this? I'm assuming it's the monitor, and I went through the menus four times trying to find an option, but couldn't find anything. A work-around for now is just cycling between inputs, but it's a pain in the butt..

Thank you,
-R
 
The only way to avoid this on the 37w3 is to hook the PC up through one of the DVI ports. It will auto adjust the gamma every single time you switch resolutions on the VGA input.

If you use DVI or HDMI it never does it.

I have my 360 on the VGA port right now, and the only real solution I've found is to just wait until I'm sure the 360 is logged into live and done with all it's boot stuff before I switch inputs. Even if you turn off auto adjust it will still set the gamma based on the image displayed when you first switch inputs.

Any particular reason you're not using one of the DVI connections?
 
set your monitor's picture to the way you like it.

install monitor calibration wizard.

it will keep the desktop color profile in your games so the display doesnt change when you start one.
unbelievably handy tool to have.
 
Back
Top