• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Increase 3.3V rail on psu

H

hanlin

Limp Gawd
Joined
Oct 20, 2004
Messages
243
I have an PCP&C 510 Turbo Cool Deluxe psu. The rails are all extremely stable and is right on. However, I have reached the ceiling in my memory but not quite in my cpu. I've tried dividers but always end up with too low of a memory speed. My idea is to adjust the 3.3V rail to a little bit higher. Other than the memory, what else will it affect. The psu has 2 holes for adjusting rails on the bottom of it. Which one is it, and will adjusting it also raised the other rails?
 
Unless you've modded your board to run the memory directly from the 3.3V line, then adjusting the 3.3's voltage will do nothing for the memory.

Almost all of the chip on the motherboard get their power from the 3.3V lines. A very few directly, most thought step down regulators.
 
You must log in or register to reply here.
Back
Top