If you own an MSI k9n neo-f please reply

M

machineheadg2r

n00b
Joined
Jul 3, 2006
Messages
9
Which ram did you guys get to work with this board? I have the OCZ value ram and its a no go, so i need some new budget ram, 1 gig
 
corsair xms 3200c2 rev 5.1 2/512 sticks,cost 100.00.clocks 1 to 1 with the cpu up to 255 htt.very good ram for the money,also at 250 htt settings are 2.5,3,3,7,1T.
best ram ive had for 100.00 dollars.20 bucks more than value brand and it flys.
 
Ok ive been playing with some Patriot on a MSI K9n-f 550 !!! when you boot enter bios and set the memory to 2.2volts this is the factory spec for this mem to run properly!!!;)

it will run in auto mode detected by spd No problem!!! I set everything to manual and ran the timming s at (5 5 5 12 2.2volts @ 1000mhz with a 800mhzbus and mem set to 800mhz in bios to run my 90nm 3200+@2400mhz and 1.24vlts 32idle 43load!!!...By the way ...this was with (1.0BIOS) Right outa the box....:D

part# Patriot Memory (PDC21G6400ELK)1GigDual Channel Kit With EPP and Low Latency timing 4 4 4 12 at 2.2volts $89.00@frys or $84@Newegg
 
I'm using the Geil 1 gig 667 piece, I'm looking at picking up the 2 gig kit they have that's 800, and 4-4-4-12 timings.

Meant to drop a price too, it's on newegg for 139.00 right now. My 1 gig piece was 89.00 before the prices started dropping.
 
I wanted to update this, I just picked up the 2 gig set 4-4-4-12 PC6400 set for 111.00 :) That's with shipping.

Later,
Deathb0t
 
You must log in or register to reply here.
Back
Top