So I have an i5-6600k at 4.7, with the midrange ga-z170xp-sli board. Unfrontunately the board has quite a bit of vdroop, it goes from 1.475 idle to 1.415 under load. So to get a decent OC the chip needs to idle at 1.475 to hit 1.41 at load. Will a high idle vcore do damage the way a high vcore under load will? The average time I keep a cpu is about 4 years. Thanks! Its liquid cooled and the temps are good. P.S. ignore the signature for now, its not updated.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
Idle Vcore
- Thread starter Pilot53
- Start date
Bandalo
2[H]4U
- Joined
- Dec 15, 2010
- Messages
- 2,657
High Vcore is high Vcore. I'd say a higher idle is worse simply because a typical computer spends a hell of a lot more time idle than at full load.
- Joined
- Feb 11, 2013
- Messages
- 6,478
can't you just go with more better and modern vcore setting as Adaptive or Offset?. using manual voltage + Vdroop or LLC it's the worse possible method of apply vcore, in the past manual voltage was the only way of apply higher voltage when overclocking, but in the past with planar achitectures CPUs used to be more tolerant to static/fixed vcore 24/7, so today a modern tri-gate/fin-fet CPU can suffer faster degradation specially at above 1.4V..