Ideas? Suggestions? Improvements? Check this out.

[Marc113-]

This is my current system. I have been modding the case etc:

AMD Barton 2500+ Overclocked to 3200+ (1.8ghz to 2.2)
Thermalright SLK 900(A) with VANTEC 92mm tornado
DFI Lanparty NFII Ultra B
2 * 512mb Dual Channel Kingston hyperX pc3000 @3200
(2-2-2-6 timings)
ATI AIW Radeon 9800 Pro 128mb
Maxtor 120gb 7200rpm ATA133
Maxtor 60gb 7200rpm ATA133
Figitsu 40gb ATA100
Antec 400W SL400 PSU
Enermax Case
3DM01: ~18000 / 3DM03: 5722 PCMark04 : 3700

Here it is

*Flexo is incomplete, Should i finish in uv green or uv blue?
*PSU will be modded with a 92mm uv green fan, an 80mm uv green and blue fan, a uv blue psu window with a 92mm hole, flexo (green or blue to finish?) and green molex plugs.
*ATI AIW 9800 pro will be modded on monday with a VGA silencer Rev 2.0, with arctic silver 6, and OCZ BGA Ramsinks (copper) with stock adhesive tape.

(Without flash)

My Ram Pc3000 @ 400mhz (windbond bh5) cl 2.0 (2-2-2-6)

Front of case

I drilled four holes and wired four new leds for the Lanparty Diagnostic Leds

 

[Marc113-]

Back of case

More of the back

A nice place to hide the inverter.

Here is what keeps my overclocked barton 2500+ at a cool 36º C
(Vantec Tornado Dual ball bearing 4500 rpm 92mm fan on top of a thermalright slk900(A) Copper Heatsink.) Cpu is at 1.725 volts. 11 * 400mhz

My ATX connector (Custom UV green) The risk was probably not worth it

The UV green 12v connector

Any suggestions, ideas or comments are welcome. If you have any questions on how to install all this stuff please feel free to ask.

 

[pHatalbOom]

Looks like a lot of work went into that. Very nice.

I think your next step is to get a bigger case...like a Lian Li PC70

/edit and is it loud?

 

[Marc113-]

Originally posted by pHatalbOom
Looks like a lot of work went into that. Very nice.

I think your next step is to get a bigger case...like a Lian Li PC70

/edit and is it loud?

Yeah it can be loud. I bought a six speed fan controller because the tornado makes all the noise. I usually keep the tornado at 3100 rpms instead of 4500 rpms. At 4500rpms it is 54 dB.

 

[mpcamer1220]

stealth the drives, put back the floppy covers, clean up the wires and take off the covering on the bezzle so its bare metal.