IDE+Sata raid 5 combination? and soft raid expansion.

cowbell

Weaksauce
Joined
Apr 24, 2005
Messages
68
Hi guys, Is it possible to use a combination of IDE and Sata drives of the same capacity in a raid 5-array? And here is a question I have been searching all over the internet for: Is it possible to expand a software Linux raid-5 array? meaning for example, If I have 3 drives in Linux software raid 5 can I add a 4th drive to the array with out losing data to expand the capacity of the raid-5 array? I hear it is possible with a tool called raidreconf a tool included in the linux raid tools package but does anyone have experience with this. I would greatly appreciate any and all info. thank you :)
 
If it's a software raid, no problem.

As for resizing, I have seen raidreconf, but I haven't tried it out. It'll probably work, but BACK UP before you try it. I would expect that it deals with expanding a raid5, but it'll be pretty slow. You might be best off backing up, and destructively expanding, then restoring from backup. Either way, if you care about the data, back it up.

You might also want to try out the LVM tools; they might do raid5-like striping (I know they do striping & mirroring) and allow for expanding filesystems across multiple disks.
 
LVM indeed will make RAID-5 arrays; as for expanding them, I've never done that, but IIRC they do have that ability
 
Thanks guys I'll probably test it out first with a few gigs of anime before I start packing data onto it. And if I do ill try an expansion later I'll back up any data I don't want to risk losing. But if anyone has had experience expanding a Software raid 5 array please enlighten us. thanks.
 
Might have better luck asking over in OSes in the Linux subforum, or on a linux forum. Good luck!
 
Back
Top