• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

IC7 Northbridge cooler replacement?

Q

QQuxa

n00b
Joined
Oct 13, 2003
Messages
46
Hey,

I saw abit ones at excaliburpc, but I can't buy there, so I'd like to ask if there are any other *compatible* ones, and if so then which?

Thanks!
 
Zalman has a passive heatsink for the northbridge I believe.
They might have something else too with a fan.
People have used the passive solution with no problems and less noise.
I've got a spare Abit hsf but am getting the Zalman hs also.
From what I'm hearing it's only a matter of time when the fan fails not if.
 
You can check SVC for the northbridge heatsinks or go to Zalman's site for their passive one.
 
well im running my 2.4C at 3.0 - would passive solution be enough?
 
Yes... I have my 2.4C running at 3, with a passive NB.... I used the Zalman (the yellow/gold one) and used a scroll saw to trim a couple of the corner fins off so I could use the circular mounting bracket... haven't had a bit of trouble, even through a move, and a few trips to my brother's house for gaming... I just lapped the bottom a bit, put down some Ceramique (sp?), and put the passive sink on... much quieter than the hairdryer on that original stock NB cooler...

If you check back in the forum, there were a lot of HOWTOs and discussion over this... many had pictures.... you just need to "dry fit" the sink to make sure that they little spring clip is not under soo much tension that it rips those little hooks out of the board... I used a small file to fine tune it....

BTW, my P4 is folding with 2 instances, so 100% CPU usage... and it's on 24/7... haven't had any trouble...
 
I have my 2.6c at 3.2 and running the passive Zalman northbridge heatsink. So, there's no problem with heat.
 
Hmm, last time i tried doing something, I messed up my stock nb hsf;p So i'd rather not do any modding stuff.. And I understand that zalman's hs doesnt fit on IC7 without modding, right?
 
You must log in or register to reply here.
Back
Top