Taodragon00
Gawd
- Joined
- Jun 16, 2004
- Messages
- 660
I have a raid 0 setup on the first 2 ports of the SI chip. My raptors worked fine but all of a sudden, they stopped and only 1 drive is recognized now. I assumed... dead drive, but i put the "dead" drive on the ICH5R controller and it see's it fine when the SI chip wouldn't even detect the drive.
Not sure what I should do because no channel on the SI will see the supposed bad drive. Can I just setup the ICH5R as Raid in the bios and move the 2 raptor's over and the raid partition be saved? Or do I have to move them and recreate the raid and partitions? I want to save the data off the drives if possible. Any ideas would be awesome.
Not sure what I should do because no channel on the SI will see the supposed bad drive. Can I just setup the ICH5R as Raid in the bios and move the 2 raptor's over and the raid partition be saved? Or do I have to move them and recreate the raid and partitions? I want to save the data off the drives if possible. Any ideas would be awesome.