IC7-MAX3 and SATA

Mase

2[H]4U
Joined
Dec 18, 2000
Messages
2,771
Curious what controller to use for OC'ing.
I'm switching out my IDE drive soon and wanted some input if anyone knows.
I believe there is a Promise and an Intel one...
I'm a SATA n00b and dont want to ruin my nice OC.
does it matter or is one better than the other.
my only other drive in there will be a DVD burner.
Thanks!
 
well OCing and what sata cont. the board uses are 2 different things

what is your question cause i using that board right now
 
If your gona OC, use the IC5HR SATA chipset, why? b/c unless you lock the AGP/PCI bus in teh BIOS, your gona over clock your PCI slots too and the Silicon Image SATA chipset runs off the PCI bus, thus its slower, and will overclock with everything.

Lock the AGP/PCI setting 64/33 or something like, i forget what its locked setting is and then oc, otherwise use the intel chipset.

the intel chipset is natively faster due to the fact that its on its own bus and not shared with the PCI subsystem.

so use the Intel chipset when you OC or lock teh SI one down and OC. but the Intel is faster.
 
that answers my question,thanks. I figured using the Intel one but my buses are locked anyway. Just wanted to avoid any stability probs that may crop up.
Reading all these issues with the A64 platform and SATA's i was curious...
I nkow it is an entirely different issue but being a late SATA adopter i figured
one of ya'll would have a jump on this.
peace
 
Back
Top