• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

IBM M1015 with ssd write performance issues

P

Phorcys

n00b
Joined
Apr 19, 2014
Messages
1
Hello,

I have issues with the write performance with a ssd attached to a IBM M1015 (Flashed to LSI 9211 IR) with the latest lsi driver. I have a Samsung 840 250GB attached to the controller and read speeds are fine but the write speeds are terrible.

The Seq write is about 168MB/s, 4K about 0,9MB/s and the 4K-64thrd is about 8,116MB/s. I used AS SSD for benchmark.

I have also attached a Samsung 840 EVO and have the same results on the writes also the controller is tested in another machine.

Is the IBM M1015 not capable of handling a single SSD? Also tried with the default firmware and the IT firmware.

Someone else recognize this problem? I am totally lost...

I hope someone can help me with this problem.
 
Last edited:
i'm using zfs on linux with ibm 1015s in IT mode and am getting anywhere from 250-300MB/s with sequential writes using dd and a block size of 1meg. I know that's not the same as AS SSD, but ti gives you some context.

How much ram do you have? Maybe the drive isn't partitioned right? Have you benched it attached to your native(mobo) sata port?
 
You must log in or register to reply here.
Back
Top