westrock2000
[H]F Junkie
- Joined
- Jun 3, 2005
- Messages
- 9,697
I bought two 1 Terabyte drives and want to add them to my current setup as a RAID 0. I do not want this to be the bootup drive, I just want something to write HD video to. So I connected my normal SATA drives to ports 1-4 and then installed the two 1TB's on ports 5 and 6. I then set "SATA" from AHCI to RAID on the Mobo and then went into the Intel Matrix BIOS and set the two drives to make a RAID 0 Volume. I rebooted the computer and it did boot from the correct harddrive, but then just keeps rebooting with a BSOD. I tried using the Windows Vista 64 Business install disc to do a repair which it did do, but still gets BSOD.
So then I tried using the Load Drivers during Windows repair. I loaded the drivers from Intels website and it processed for a while and then said the operation could not be completed.
So I set the SATA back from RAID to AHCI and everything boots up just fine (sans seeing the two new HDD's).
Is there not a way I can just enable the Intel Matrix on a current install? Or do I need to install the drivers then reboot and enable the RAID system?
I also saw I can use the secondary Marvell RAID controller for the eSATA ports. I was thinking about just running some long SATA cables from the I/O panel to drives and seeing if I could set it up that way.
I have never used RAID before and alot of the how to's on the Internet are from like 06-07.
So then I tried using the Load Drivers during Windows repair. I loaded the drivers from Intels website and it processed for a while and then said the operation could not be completed.
So I set the SATA back from RAID to AHCI and everything boots up just fine (sans seeing the two new HDD's).
Is there not a way I can just enable the Intel Matrix on a current install? Or do I need to install the drivers then reboot and enable the RAID system?
I also saw I can use the secondary Marvell RAID controller for the eSATA ports. I was thinking about just running some long SATA cables from the I/O panel to drives and seeing if I could set it up that way.
I have never used RAID before and alot of the how to's on the Internet are from like 06-07.