![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Asylum1
[H]ard|Gawd
- Joined
- Apr 4, 2009
- Messages
- 1,055
Have some Highend hardware laying around i need to sell.
Going back to school this fall and need some cash for books.
Trades i would accept
GTX580 (Extreemly high clocker)
Heatware
MSI Big Bang-XPower LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
I bought this board from ZenEffect and was going to do some ln2 runs on it but just dont have the time now going back to school.
Was tested and in working order. Heres the post from his thread.
This board is prepped for ln2.
That means it has been conformal coated to resist the effects of condensation at ultra low temps.
The board was used at MOA back in january then put away.
It has also been modded to correct pll droop.
now when you set it in bios, it sets the correct value, and when under load it doesnt droop a ton and crash your rig.
Not sure if the bios is anything special, but its the competition bios used during the event. The board was a very strong performer with no issues.
The CPU fan header is non-functional as 2 of the pins were snapped off during transport but not a big deal...Just use another header.
You can uncoat it with acetone bath with a soft nylon toothbrush. comes off very clean and quite easily with this type of conformal.
Looking to get $115 SHIPPED
MSI Big Bang-XPower LGA 1366 Intel X58 SATA 6Gb/s ...
Going back to school this fall and need some cash for books.
Trades i would accept
GTX580 (Extreemly high clocker)
Heatware
MSI Big Bang-XPower LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
I bought this board from ZenEffect and was going to do some ln2 runs on it but just dont have the time now going back to school.
Was tested and in working order. Heres the post from his thread.
This board is prepped for ln2.
That means it has been conformal coated to resist the effects of condensation at ultra low temps.
The board was used at MOA back in january then put away.
It has also been modded to correct pll droop.
now when you set it in bios, it sets the correct value, and when under load it doesnt droop a ton and crash your rig.
Not sure if the bios is anything special, but its the competition bios used during the event. The board was a very strong performer with no issues.
The CPU fan header is non-functional as 2 of the pins were snapped off during transport but not a big deal...Just use another header.
You can uncoat it with acetone bath with a soft nylon toothbrush. comes off very clean and quite easily with this type of conformal.
Looking to get $115 SHIPPED
MSI Big Bang-XPower LGA 1366 Intel X58 SATA 6Gb/s ...
Last edited:
