I7 920 D0 Processors for $199 @ Micro Center

You absolutely can't go wrong with an i7-920 D0 for $199. It's a few extra bucks for a motherboard compared to a socket 1156 but you'll likely get better overclocking potential, better SLI or CrossFire with two x16 lanes and the ability to run a 6 core CPU when they come out. If a person was on a budget they could also get away with running only two sticks of memory. Not ideal but not a big loss in real world performance.

Post some screens when you get your new system up and running.
 
You absolutely can't go wrong with an i7-920 D0 for $199. It's a few extra bucks for a motherboard compared to a socket 1156 but you'll likely get better overclocking potential, better SLI or CrossFire with two x16 lanes and the ability to run a 6 core CPU when they come out. If a person was on a budget they could also get away with running only two sticks of memory. Not ideal but not a big loss in real world performance.

Post some screens when you get your new system up and running.

Will do!

I can't wait to get it up and running [H] style
 
I picked one up this weekend. It does overclock on pretty low voltage from what I've seen. 3.8 is stable (prime 95 for 8 hours is good enough for me) with 1.225v for the cpu. To get to 4 takes 1.3v and that gets temps hot enough that I haven't tried going further yet. It'll have to wait for my lazy bum to get a water cooling loop going.
 
It would go nicely with the Evga LE on the same page :D
 
you wanna know much my local Microcenter rocks?

Picked up an i7 920 D0 and then walked over to the clearance racked and picked up my Asus Rampage II Extreme board for $100 after rebate. It was open box and missing the add on sound card and i/o panel but still after buying those two parts from ebay for a total of $30 I made out like a bandit.

My 920 is chilling at 4200mhz with 1.32v and I have gotten it up to 4.5ghz but with 1.44v so thats not nearly worth the extra voltage.

My current load temps with prime95 small ff'ts is around 77c on the hottest core and 72 on the coolest. Not bad at all.
 
Do these sales usually run for awhile (2+ weeks)? I'd like to jump on this deal but ideally I'd like to wait until after Christmas to buy.

I thought I read a post awhile back (maybe 2 months ago) from a guy that got the same deal from Microcenter, so it makes me believe that they usually run them for awhile, but maybe its on-again-off-again.

Anyone know?
 
From all that I've seen they have been that $199.99 price for a few months without fluctuation. It may be safe to assume this should run through christmas, but no one really knows...prepare for the worst.
 
Microcenter rocks. I live in STL near the new one and boy is it great. At $199 D0 the price is really hard to beat. Find a good deal on mobo and RAM and you are set to jet.
 
From all that I've seen they have been that $199.99 price for a few months without fluctuation. It may be safe to assume this should run through christmas, but no one really knows...prepare for the worst.

Agreed, I am on their mailing list (email) and have seen it on and off for the past month or so.
 
Microcenter rocks. I live in STL near the new one and boy is it great. At $199 D0 the price is really hard to beat. Find a good deal on mobo and RAM and you are set to jet.

Absolutely agree!

I wasn't going to upgrade anytime soon but this was good enough of a deal to push me over the wall I was teetering on.:p
 
Now that the one is open in Brentwood (MO) I'm pondering going up and picking one up but I'll probably have to wait for board+ram. Trying to decide if it's really worth the jump from a q9450@3.6 on a ep45-ud3p with 8gigs of 800 running @ 950. Anyone care to give input?

I'm sure the HT would help with my Ps/Ai/Id use (graphic designer/CS4 guy here) but not sure it would help otherwise.. Decisions, decisions.
 
Ya, I cant seem to stay away from the brentwood store for more than 2 days, doesnt help that my gal works at the Galleria. Best deal seems to be buy the i5 750 at the store, then newegg some cheap ram and a mobo.
 
Bahh! I just got all the parts in for the new build yesterday!

These deals are never available when I go to buy. ::pout::
 
I had picked up a 920 at the MC in Kansas City, but when I went back later to pick up a mobo they were pretty much out. Well, actually they had a couple of MSI's.
I asked a fellow there about when to expect some more X58 boards and he said not for a long while if at all. He didn't clarify further. I almost considered jumping to the 1156 route

I managed to pick up an Asus board and am awaiting a new case before I abuse the 920.
 
I was thinking about getting one from MC for a while, then I was given a QX9750 a couple weeks ago. I think I'll be waiting until next year for a major upgrade.

It's been at $199 since August I think.
 
Microcenter rocks. I live in STL near the new one and boy is it great. At $199 D0 the price is really hard to beat. Find a good deal on mobo and RAM and you are set to jet.

now that it isn't a PIA to get to with 64/40 reopened now.. awesome place.
 
I wish I hadn't bought my 860. Seeing people with similar stable OC's at .3-.4 less Vcore makes me cringe.
 
The Chicago MC has had this deal going on for quite a few months--I think the first time I spotted it was back over the summer? They seem to sell well. I checked about a week and a half ago, and they were OOS. Was told to check back in a few days as they constantly replenish the stock. Couple days later, called and was told they had 58 of them in. :D

Now if only DDR3 prices would drop...
 
Any way to tell if you're getting a D0 stepping model from the _outside_ of the box? My wife is going to the northern VA store to pick mine up tomorrow when she visits her parents in Arlington, and I'd like to give her straightforward instructions on how to check.
 
Any way to tell if you're getting a D0 stepping model from the _outside_ of the box? My wife is going to the northern VA store to pick mine up tomorrow when she visits her parents in Arlington, and I'd like to give her straightforward instructions on how to check.

SLBEJ should be on the box.

Here is Intel's Box Code info:

Box Order Code:
BXC80601920
BX80601920
OEM Order Code:
AT80601000741AA
 
Last edited:
I got a D0 back in October in Paramus, NJ. Can't claim that this is a sale on old parts. Yes this has been going on for a while.

My D0 clocks to 4.0 ghz on 1.35v. I can go higher, but its at the thermal limits with the crappy cooler I got (Coolermaster V8). I'm very happy with it @ 4.0 ghz - besides, I came from an XP 1800.
 
Back
Top