• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

I need help with the cooling please ...

your temps are fine.. but your overclock is not stable.. thats why p95 is showing errors.. do a little more fine tuning with voltages and memory timing.. also you can run small FFTs to see if its the cpu that is not stable or if its the memory.. if it passes with small FFT's then its most likely the memory or north bridge.. if it fails the small FFT's then you probably need to do some more tweaking on the voltages for the cpu..
 
Then you need to raise your CPU voltage a step and re-test. Keep doing that till it passes, and then try the large ffts to make sure your memory sub-system is also stable.
 
the error continue :

I raise up the vcore voltage and th fsb

the memeory is corsaier dimnator 1066 with fan
and the cpu is the qx9650 @ 4 gh
i but the memmory timing 5-5-5-15 2t and its not linked

so what to do i use water with ice , omg low temp and even 4gh not pass the test ....

pictuers :

http://img406.imageshack.us/img406/7523/extremeoc4.jpg

2-

http://img406.imageshack.us/img406/439/extremeoc5.jpg

3-

failed omg ....

http://img406.imageshack.us/img406/4742/errorfeild.jpg


but i run the vantage and i get no error ......... please some help ...
 
try to up your cpu voltage little more. it is related to the cpu not getting enough juice. one or 2 step up and that should fix the problem.
 
You must log in or register to reply here.
Back
Top