I need a video cooling solution very badly

Staples

Supreme [H]ardness
Joined
Jul 18, 2001
Messages
7,978
Over the past few months, my video card has gotten so hot that it has been freezing. Blank screen, high pitched noises. It happens 10-15 minutes into a game and pisses me off so much because it takes so damn long to get into a BF2 game to start with. (BTW, Farcry is by far the most crash prone game. It will crash in 2 minutes at times) The only solution is to keep my loud AC on (and that is still no guarantee but at least it stops the odds of a crash by 85%). My room is about 87 degrees right now and I hate the damn AC because I hate noise. I have one inlet fan, and one outlet fan. I also have the adjacent PCI slot cover next to the video card removed. That does not seem good enough for the video card though. I want a fan that blows directly on the video card and BFGs two fans.

There is not enough air circulation around the video card. Is there such thing as a PCI slot blower (hopefully it will be quiet) that I can put next to the video card that will pull in air and blow directly on the video card? Sure BFG put two fans and a lackluster heatsink on this 6800GT but the air in that region stays stagnant so hot air just gets recycled. I have looked up some heatsink solutions for video cards but it looks like they are just replacements for the factory ones. I don't want to risk ruining the video card.

What would your recommendations be? I can always by better case fans (which might help a little) but I bought slow ones for a reason. I HATE NOISE. Also, the inlet fan in the front hardly sucks in any air because the vents are so tiny. Maybe a new case would help? I currently have the version one Lanboy from Antec.
 
Bugalaman said:
I bought this thing to cool my BFG 6800 GT http://www.newegg.com/Product/Product.asp?Item=N82E16835118117. it works great. it idles at 52 on a warm day, and I've never seen it go above 70
Do these mount on to the GPU itself? It has a plate that looks like it would go onto a CPU. If so, that would mean you have to take off the original heatsink which may or may not be a challenge, never tried it.

Edit: Ok, I see on their site how it works.

I am interested to know if you found it to be a lot better than the factory HSF.
 
It's meant to replace the original GPU heatsink, and works pretty much the same way that a CPU hs/f would. Although it's not the same as a 6800gt hs/f, I had to replace a dead fan with an aftermarket cooling solution similar to the linked one on my x600pro a few months back, and that was really the first thing I'd ever done concerning any type of work on a PC part...I'm sure you could handle it.
 
Staples said:
Do these mount on to the GPU itself? It has a plate that looks like it would go onto a CPU. If so, that would mean you have to take off the original heatsink which may or may not be a challenge, never tried it.

Edit: Ok, I see on their site how it works.

I am interested to know if you found it to be a lot better than the factory HSF.

It isn't hard but the one thing you want to keep in mind is room, you have to make sure you have enough room between slots to fit a larger heatsink. The stock hs/fan on my X800 is very thin, an aftermarket GPU cooler is almost always going to be larger and space between slots is usually very rare.
 
Yeah. If you are planning to use that Zalman VGA cooler on an SLI setup... be prepared! It won't fit most SLI motherboards. The only board that I know fits two of em side by side is the Asus A8N-SLI (maybe all Asus MBs). Becuase the board's PCIe-16x slots are farther apart.
 
YOHAN14344 said:
Yeah. If you are planning to use that Zalman VGA cooler on an SLI setup... be prepared! It won't fit most SLI motherboards. The only board that I know fits two of em side by side is the Asus A8N-SLI (maybe all Asus MBs). Becuase the board's PCIe-16x slots are farther apart.
Thanks for the tip. The HSF do look huge so I would not be surprised. I currently have an AGP 6800GT so there is no worries of me doing SLI but I am really looking at getting a new case. One with an upwards facing fan. I am sure that will do wonders for getting rid of heat. And if that does not fix the problem, then I will get the VGA HSF that was suggested. One thing that really sucks about my case is that the one inlet fan has a really hard time getting new air in the case because the slits on the front of the case are tiny. I don't think this case (and half of them out there) were designed with breathing in mind.
 
Staples said:
One thing that really sucks about my case is that the one inlet fan has a really hard time getting new air in the case because the slits on the front of the case are tiny. I don't think this case (and half of them out there) were designed with breathing in mind.

Time to break out that dremel!

:D
 
farcry crashing usualy means memory, its worth investigating, bad system memory could cause anything to happen
 
it reall does work better tahn that stock cooler. I wasn't expecting anything much (I bought it to give me an excuse to work on my computer) but it really did make my card cooler. now I need to put a XP90C on it :cool:
 
Bugalaman said:
it reall does work better tahn that stock cooler. I wasn't expecting anything much (I bought it to give me an excuse to work on my computer) but it really did make my card cooler. now I need to put a XP90C on it :cool:
in other news bugalaman snaps his 6800gt in half because he went too far with cooling his card
 
Ya they make slot coolers. Search newegg for them.

----

also, yea I wouldn't even attempt to put .7 kg on my gpu :eek:
 
wooden dowling + washer = card support

its centerd on the core anyway, so its not really that bad... and its light than a 6800 ultra HSF and i think the BFG one hes using...
 
I use an antec vcool double slot pci intake fan. (My case is also not very good for cooling, as it only has one 80mm fan at the front).

Here's how it lowered the temps in my rig:

http://www.hardforum.com/showthread.php?t=919893

It also allowed me to up the o/c on my x800xl from 453 core 567 mem, to 468 core 576 mem!
 
i have a better proposition
these fans at 12 cfm each at 28dB, put two under the video card like i will with mine, that will provide more total air flow then the v-cool and two side by side will perfectly fit in the pci slot holes, i belive it measured out to being 2 slots, wasnt a issue for me http://www.directron.com/5cmfan.html cant beat $1 per fan

turbine coolers make me sick so much noise, so little cfm
 
Staples said:
My room is about 87 degrees right now and I hate the damn AC because I hate noise.

Well I'd look at that first. That is fucking hot! Lower your room temp by about 10-15F and see what happens.
 
tazzmissionx said:
Staples if your are interested in a PCI fan card solution, I am using a Vantec Spectrum that I got from xoxide.com, works pretty well for me but has an irritating whining noise when you are close to max speed.
http://www.xoxide.com/slotcooler2.html
Wow, that is pretty cool. It is exactly what I was looking for. They are out of stock though. I have been wasting a ton of time looking at new cases. As I said before, although I have slow fans in my system (because they are quiet), it probably has a very hard time breathing because of the small opennings in the front. As for a new case, this Lian Li one looks great.

http://www.newegg.com/Product/Product.asp?Item=N82E16811112077

This case look to have to have a very good air flow design (Official page) but it will have to sacrifice the window. If you look at the official page, it seems to have been designed to ventalate the VGA as well as the CPU. I think that maybe just a new case that can stay cooler than 54 degrees will fix the problem. Kind of expensive but I am selling myself on the idea that it will last since BTA (?) does not seem to be catching on.
 
ryuji said:
farcry crashing usualy means memory, its worth investigating, bad system memory could cause anything to happen
I hope it isn't due to system memory. There is a long story but the jist is that I accidently switched my memory for some PC2700. Now I am stuck with this memory. It would be worse to know that this memory that I was never supposed to have is causing problems.
 
spend the $2 on the 50mm fans and glue/tape them to the back of your case under the vid card, and even make a duct out of plexy, that would preform better then the turbine fan with much less noise if you know how to read the error codes you can even figure out which stick is causing errors, my friend uses farcry instead of memtest
 
try a friends memory, i talked to my farcry friend and he said hes damn sure its your memory, he said the farcry ai is extremely memory intensive and stresses the hell out of it and i wouldnt be surprised if bf2 stresses the hell out of memory as well, would you? even if its not the memory, it would be good to rule it out would it not?
 
Staples said:
I hope it isn't due to system memory. There is a long story but the jist is that I accidently switched my memory for some PC2700. Now I am stuck with this memory. It would be worse to know that this memory that I was never supposed to have is causing problems.
Your cpu is @ 2.2ghz (11x200), and your ram is 166mhz stock. Are you overclocking your ram to get it to 200mhz 1:1 ? If so, did you adjust your mem timings, add more voltage, set a divider? This definately sounds like a memory problem. A bit more info on your ram and cpu settings would help us to help you.
 
SpoogeMonkey said:
Your cpu is @ 2.2ghz (11x200), and your ram is 166mhz stock. Are you overclocking your ram to get it to 200mhz 1:1 ? If so, did you adjust your mem timings, add more voltage, set a divider? This definately sounds like a memory problem. A bit more info on your ram and cpu settings would help us to help you.
I have a cheap Soltek Nforce3 250GB motherboard. I actually regret buying it. I can not overclock the RAM on in. It is running at 333MHz and the timings are set to 2.0-2-2-5 T1. It is Patriot RAM. The CPU is 11x200 as you assumed and it is slightly overclocked to ~11x214 or so. I am sure I have dealt with the same problem when the bus is at 200 or 214 so I really don't think the problem is the CPU. I should slow down the CAS timings to 2.5. If the memory is being stressed too hard (which it should not because it is rated at CAS 2.0), it will show a decrease in crashes. I will restart now and set the BIOS to 11x200 and CAS 2.5 before I forget. We'll see if I acheive any more stability.
 
Well, still froze. At timings of 2.5, 3, 3, 5. If it is the memory, it isn't because it is being pushed to had. I was reading the event log for the system and I found this. I think it entered it when the computer restarted rather than what it crashed.

A blue screen (Stop error) was reported. The message contains details about the error. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

I never knew MS actually called it a blue screen. Anyway, the error just says the kernal crashed and nothing much else. I should try my brother's RAM to see if that fixes anything. That probably won't be till tonight.
 
Back
Top