I need a t-fitting locally fast

[Hordsak]

I'm going to setup my watercooling kit, but after doing some research in the days it was being shipped, I've decided I want to add a drain port for ease of maintenance. I've found this one locally at a hardware store, but I want to make sure it won't cause any corrosion or problems with the loop. It can be found at the link.

http://www.homedepot.ca/product/1-2-pex-barb-tee/909805

Edit: I've also found this brass one that looks like it should work.

http://www.homedepot.ca/product/1-2...ion-x-1-2-inch-pex-trans-coupling-host/954404

 

[W.Feather]

id guess it would since it is probably not the same material as the rest of the loop?

 

[Skripka]

id guess it would since it is probably not the same material as the rest of the loop?

PEX is plastic, so it should be inert in terms of corrosion.

 

[W.Feather]

ahh, picture doesnt look plastic is why i mentioned that, if its plastic you should be just fine.

 

[Hordsak]

Thanks guys I'll pick one up and see how it goes.