• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

I need a power supply

W

wookiewoof

n00b
Joined
Feb 6, 2005
Messages
22
I read the sticky.. Before Making a Thread About Buying a PSU. I think it has made me more confused.

I am at the moment looking for a modular type as my case is small...gets smaller every time I open it up. I can't decide on the Antec/modstream/Superflower. A kick in the right direction would help.

However I am thinking about modding my case by creating a enclosure the same length and width of my case but only about 4inches high.

I would put the PSU in the enclosure and mount my case to the top of it and run what wires I need up through the bottom of the case and the hole where the PSU is suppose to be would be an exhaust. For this scenario I am thinking of getting an Enermax. But whatever I get I will want a 20pin connector..or if it is a 24pin..one that the extra 4 pins will slide off.

Comments on either scenario will be appreciated.
 
wookiewoof said:
However I am thinking about modding my case by creating a enclosure the same length and width of my case but only about 4inches high.

I would put the PSU in the enclosure and mount my case to the top of it and run what wires I need up through the bottom of the case and the hole where the PSU is suppose to be would be an exhaust.
Click to expand...

Or you could just buy a Stacker and use the lower PSU bracket...
 
You must log in or register to reply here.
Back
Top