i have a serious problem, need assistance

Boozer

2[H]4U
Joined
Mar 11, 2004
Messages
2,348
hi, i just installed my new custom cooling system. i had all my parts on the table, i put my motherboard in the bag it came in, i cant think of what its called. my brain is fried but, it was on the table along with all my other parts. but my dad was in a hurry to look something up in the phone book, so he put the phone book right on my motherboard. the cpu was in the motherboard at the time. the phone book is pretty big. so i was like crap! okay well ill see what happens when i put it together. i finished modding everything, it came out nice btw. i start it up, i hear the first beep then it shows me the mobo splash screen. then it just stays there. ive tried clearing cmos, but that was no help. ive tried using different hard drives. but that was no go. it just doesnt want to go past that first screen. i was thinking it's the cpu, i might have tightened the waterblock too tight. but that wouldnt allow the computer to even show a picture. it would be a blank screen right? im all out of ideas and options right now. any help is much appreciated. thank you

oh yeah the computer is in the sig minus the exos system
 
nobody can help? its a really weired problem. it stays on for a few min then it just shuts off. hmmm
 
First of all, your computer is not in your sig, or at least you did not attach your sig.

Second, put bluntly, your problem is here:

so he put the phone book right on my motherboard. the cpu was in the motherboard at the time.

I'm afraid that's called user error. :cool:
 
I'm afraid that's called user error.

apparently...

AMD 64 3500 2.2Ghz Clawhammer::MSI K8N Neo4 Platinum nForce 4::1GB Muskin DDR400::Gigabyte X850XT 256MB::OCZ Modstream 520Watt::WD Raptor 36GB-OS::2 WD 80GB-Raid 0::WD 200GB Storage::Exos Watercooled
 
IF you were a liar, you could simply tell them it got damaged during shipping and you want a replacement, but not all of us are like that.

Otherwise you could take it to a local repair shop and see if they could help you out, maybe even RMA it if it's covered under warranty (physical damage isn't free for RMA in most cases, for my motherboard it was $30 to RMA it).
 
I would unseat the memory and reseat 1 stick take out everything not needed to get to bios and attempt restart if still won't boot try other memory Btw you did test for leaks right?
 
oh yah tested for leaks. everything is solid. ive had this system for a while and all thats left around here that could look at it would be pcclub, my mobos still underwarranty so ill just rma it with msi if need be. but for now ill try the memory, hopefully it will get past the splash screen. i havent gotten past that, so i dont know if i can get into bios
 
Id be surprised if it was the cpu, that usually results in lots of beeps. Is memory seated correctly? Are you sure its not just waiting for you to enter the settings? Can you get int o the bios? Does it detect any hard disks?
 
well, i just tried memory and that was no go. ive tried getting into bios, i hit the delete key and it does nothing. hard drive light isnt blinking so its not being detected *i dont think*, it does spin up ofcourse. other then that its just not responding. ill take a pic so you can see exactly where its stopping.
 
Check the contact of the waterblock, have you set it all up right? By that I mean stuff like the bolts and the use of washers to stop metal touching the board etc.
 
its fuzzy, but you can still see it. im not good with cameras
fdas.jpg


its stopping here, just doesnt respond. but it shuts off.
 
Leeum said:
Check the contact of the waterblock, have you set it all up right? By that I mean stuff like the bolts and the use of washers to stop metal touching the board etc.

hmmm leme c, never thought of that. i think ill try taking everythign out and starting it up outside of the case. i just gotta figure out how because the tubes arent long enough to reach the mobo beside it.
 
If you hit del, or whatever theother says does it do anything? My board did that when i first installed it, turns out it was just sat there behind the splash screen saying new cpu please sort me out or something to that effect.
 
yeah i press delete and it doesnt do anything. its really odd. its just frozen.
 
nope, nada. keyboard hasnt been checked yet at this point of the bootup. all i can do is stare the screen. usually when i startup it checks for keyboard and mouse, u know the usual bootup. i can see it register the keyboard cuz all the lights come on then off. this is just dead. the mouse doesnt power up or anything. ive tried different ports for the keyboard but no go. its all apart right now. im looking for a short somewhere but there is none. i think the mobo might just be dead.
 
No chance it could be hanging on a drive detection? Try unhooking them all to be sure?

 
i duno. it has to run through the bios first before it checks drivers. thank you all for your help. but i think im going to RMA, i dont have an extra mobo to test. im going with my stomach n RMA'ing the mobo, its the only thing that would break besides the processor. and the processor still works. so... hopefully it gets fixed. thanks again for all your help
 
Back
Top