I built a new Intel system, need advice

neokeelo

[H]ard|Gawd
Joined
Sep 9, 2002
Messages
1,649
This thread will cover a few topics I am having with my system so thank you for reading it. Feel free to give advice about any or all of the topics stated here.

I built the following system in my signature for about $1050 over a period of the last 6 months.
I paid the following…

CPU- (6 months ago used) - $160
Cooler- $40
MB- $200
RAM- $194 w/ 40 rebate
Graphics card – $250 with Arctic Cooling X2
Case- $100
Power Supply- $45
Burner- $37
Soundcard- $18

I have been happy with it except for a few things. They are

1. Temps are running too hot for my likening while at load. I am not sure why because I have a decent cooler.

2. I am adding 2 more SATA drives (4 total) next week and am worried about not having enough juice to keep my system stable at 4ghz. (My x1800XT pulls over 30 amps while at load) I am using the XCLIO 450BL
Specs ->+3.3V@32A, +5V@30A, +12V1@15A, +12V2@17A, -12V@0.3A, +5VSB@2A

3. (Part 1) I want to overclock my ram to get more bandwidth out of it but am not sure how to go about doing this. For example If I run it at 712Mhz (stock is 667) while CPU is at stock and it is Prime95 Stable all day long, does that mean that gaming and windows is going to be stable too? If I put the cpu back up to 4ghz will this make a difference?
3. (Part 2) Adjusting the timings on the ram confuses me and I do not know what to adjust if I get errors\crashes while in Windows,Prime95, and games.

4. While running at 3.75Ghz @1.42V 24\7 My max load temp reaches 66C sometimes which I do not like. Running it at 4ghz temps reach as high as 70C hang around 68-69 most of the time and running 4ghz 24\7 with overclocked ram was my goal with this system. If I plan to keep this CPU for the next 2 years (which it being single core I doubt I will) are those temps ok?

Having paid $200.00 for the Asus P5WD2 Premium and it not being able to run the new Intel CPUS really sucks. Should I just get rid of my 630 and replace it with a Pentium D instead. The 630 is 64bit but I am not even taking advantage of that in XP Pro 32bit because it causes more problems than it is worth(such as with older games). I am wondering how it will perform in Vista 64 bit now.

Notice I mainly play games and multitask on Duel displays in Windows if that helps any.
 
You seem to have provided us prices and not model numbers for your hardware, the latter would be preferable.

Also, shame on you for buying a cheap ass sound card ;)
 
If you're looking to bring those temperatures down, I'd recommend two things.
1. Check your case airflow, make sure to figure out what pressure is going on in your case.
2. Pick up this.

If you need some info on RAM overclocking, here is your guide. And generally yes, if your computer is Prime95/SP2004 stable overnight (for RAM make sure to run the Blend test), the entire system is stable. Make sure to run something like superpi as well.

That PSU should still be just fine, although I'm not as well versed on intel power loads.
 
Hope this helps.
img39696fa.jpg


AIRFLOW

untitled.jpg
 
Depending on how much CFM your PSU pushes, it looks like you've got a bit of positive pressure. I think your current configuration is fine though, but I still do recommend grabbing that ninja. It'll perform better than your blue orb and at half the dba
 
The specs on that fan are
Air Flow 46.5CFM
Noise Level 23.5dBA

It's a decent fan. I think if I were you I'd buy the plus and try out the fan. I'm not even sure if you can buy the Ninja in it's non-plus guise anymore. I bought it before the plus arrived, and I'm using this fan in my system. Just to point out, the Ninja doesn't really scale with CFM. It was originally designed as a passive heatsink, so any tiny amount of airflow brings the temps down very quickly, so my ~80cfm fan is probably only two or three degrees C cooler than that 46 cfm fan.
 
Back
Top