HyperTransport Question

Acidwarp01

Limp Gawd
Joined
Jan 23, 2003
Messages
236
How do you calculate hypertransport speed into actual bandwidth? I was reading an article on Tom’s Hardware the other week regarding Nvidia’s Nforce 3 250GB and in the article it talks about the Hypertransport bus going from 8 bits and 600 MHZ to 16 bits and 800 MHZ. I was curious how you calculate that into bandwidth? I tried searching google, but was unable to find anything that clearly explains it. Can anyone help shed some light on this? Thanks in advance.
 
HT is a bidirectional, 'serial' type bus.
When you define it in terms of MHz and differentail bits in a single direction, it's the same as any other bus.

Using those numbers,
600mhz * 1 byte = 600mb/s per direction = 1.2gb/s total.
800mhz * 2 bytes = 1.6 gb/s per direction = 3.2gb/s total.

Normally it's defined in terms of "MegaTranfers / second" or MT/s.
In that case, instead of using MHz to define how often the packets are sent, you're just talking about the total number of packets that could be sent in both directions per second.
ie with the same numbers as befere:
1200MT/s * 1 byte = 1.2gb/s total
1600MT/s * 2 bytes = 3.2gb/s total.
MT/s is simply MHz *2 because 1 packet can be sent in each direction each clock cycle, or to say it simpler, 2 packets total can be sent per clock cycle.
 
Back
Top