HTPC & Server and process Pics and guide

Nerdydave

Limp Gawd
Joined
Oct 22, 2010
Messages
135
I wanted to make a guide on how to setup an HTPC guide and just forward people here. i get asked a lot how i did it.

my HTPC is a work in progress. i have been working on it for 5yrs+

Here is what i use for hardware:

There are no bluray or DVD drives in this computer. all content comes from the server even bluray 3D
case: a coolmaster case i had to modify to get a full size video card in
CPU: AMD64 Phenom II X3 720 clocked at 3.1ghz
Mother Board: Gigabyte GA-MA790FXT-UD5P
Memory: 4GB 1333mhz DDR3 memory
Hard Drive: 128 SSD
Video card: Nvidia Geforce GTX 465
3D classes: Nvidia 3Dvision x 4 (for family)
TV: Mitsubishi 65" DLP 3DTV (supported by 3Dvision)
Speakers: creative labs 2.1 (this is what i am working on upgrading)
Software: XBMC (displaying all the movies, music, pictures and radio), Cyberlink powerDVD 10 (playing Bluray 3D)

i took these with my iphone. when i can find my camera, wife hid it, i will post some more and mabe a video of how it works.
photo.jpg
[/IMG]
photo1.jpg
 
Server and process computer: (upgrade in process)

Case: coolmaster case modified to handle 10 x 2TB Hard drives (its a mess)
CPU: AMD64 5200+
Mother Board: Abit AN78GS
Video card: on Board
Ram: 4GB DDR2-800
Controller card: Areca ARC-1880ix-16
Hard Drives: 10 x 2TB (single Drives no raid)
5.24 Drives: bluray drive x 2
software: windows 7 x64, AnyDVD HD, Pavtube Bluray converter ultimate, makeMKV, TVersity.


the movies are in folders on each hard drive no real order. XBMC gets the info and does the layout all on the HTPC so i don't have to do anything really special here but get the content on the drives. and yes that raid controller card cost more then the whole computer did by a lot. before i went to the raid controller i was not getting enough bandwidth to my media centers. if 3 movies were being watched at one time it would be choppy.
 
concepts:
1. it need to be easy to use
2. able to play in the media center
3. sound and picture needs to be Great

here is how i do it.
1. I take a Bluray disk insert it into the bluray drive
2. let anyDVD scan the disk and select rip to Hard drive
3. open Pavtube bluray converter ultimate and add the folder
4. i use MP4 container with 18mbs and AC3 audio at 640kbs
5. let pavtube do its thing takes about 8hrs per bluray
6. put the movie onto the hard drive you are going to store them on*

On media center
7. open XBMC
8. open videos
9. add source and add the location of the movies
10. set content i use IMDb
11. set to manual scan. it will only scan for content when you tell it to. (how i do it)
12. click ok
13. it should show the name of what you called that location highlight that press C select scan for content
14. it will get all the movie info
15. Wait and Wait and Wait its unreal how long this takes
16. when its done sit back and enjoy the movies.

*you should go to IMBd and get the name of the movie as it is there. Name(date) is the format
 
Tversity i use to send the movies to IPads Iphones and laptops. Tversity lowers the bit rate and change the container to work with just about anything.

i will do a more in depth right up if this is popular
 
the movies on my system are formated as follows
Bluray 3D: ISO file then mounted as needed on the media centers
Bluray: MP4 1920 X 1080 18mbs Audio AC3 5.1 surround sound 640kbs
DVDs: MP4 1280 X 720 5mbs Audio AC3 5.1 surround sound 640kbs

i have no problems with 4 HD movies beeing played at the same time ATM

Media centers are connected Via 1000Bast-T Wired
Ipad iphones and laptops are all wireless TVersity transcode to lower bit rates for wireless
 
Media center upgrades
I am currently working on adding TrueHD and DTS-MA and a bluray drive to my media center. thats coming to my next build.

the changes are going to be a new video card that supports Bitstreaming, Receiver and speakers. there may be a new case too

The server is getting a over hall also
upgrades going to be
windows server or home server (anyone with ideas let me know)
a case with 16 hot swap bays
quad core cpu (TVersity can get slow when a lot is going on)
more Hard Drives
20TBs is a lot but at 14 to 18GB per movie it don't take much to fill it up.

Process only computer coming (trying to reduce how long it takes to make the final product)

now the best part my power bill is $120 a month
 
How is this is guide? Seems more like pics of your setup, might be better suited to the gallery sub-forum.
 
Valve did you read the step by step instructions? It tells you everything you need to do to get your own media center running (a guide).

The media server currently is windows 7 x64 ultimate. The media center is the same. I would love some input how well windows server works with TVersity.
 
That is awesome I do like!

ATM I have to much time on my hands :)

My setup is a work in progress. I was hoping to show how easy anyone to build one and hope to get some ideas for the media server. 20tb server and 20tb backup system is a pain to manage
 
Hah, wow....

Dave, thanks for the write-up. I'm sure someone will defiantly get some use out of it. Strange that you use TVersity. The quality was horrible when I used it for streaming. Thanks again though.
Posted via [H] Mobile Device
 
components on carpet *shudders*

how can you watch movies with all your wires exposed and stuff pilled up on each other, that would drive me nuts.
 
lol, yea its a mess. its a work in progress. the media center just finaly took over are cable box and PS3. at first i was having a lot of problems. XBMC would not get the info for the movies, no sound, the games were choppy, 3Dvision gave me problems, the case was too small. i did in side of it prety often testing something. main reason its a mess i keep testing ideas. like right now i am testing surround sound with 2 sets of 2.1 computer speakers i found boxed up. so far its working. the second sub dones not turn on but all 4 speakers and the front sub turn on.
 
err, strange for a dude in his 4th day on a forum to post a how to...... prior to determining the average users knowledge on the forum...

I've been a forum member here over 9 years and I still found useful information in this thread.


Thanks for sharing your setup Dave. I just started playing around with building a HTPC from some spare components. Still trying to get my Blu-Ray disc backup process down. Especially multi-episode volumes.
 
If you like I will do one on how to get the TV shows done right. It took me a while to figure it out on my own.
 
If you like I will do one on how to get the TV shows done right. It took me a while to figure it out on my own.

I wouldn't mind hearing what youve tried. If i remember what i was doing was using RipBot. It's been a few months though and I can't remember for some reason. I was obsessed for like 2 weeks with ripping my HBO's John Adams from my blu-ray to MKV. And not having it ghosty-shitty looking when people moved. *Shrugs* i somewhat gave up lol.
 
basicly i have found two ways to copy or backup TV shows.
option 1:
1. use anydvd to ripp to HDD

2. use makemkv to extract the episodes.

3. trancode to the format you want

option 2:
1. use anydvd to ripp to HDD

2. use pavtube bluray converter to extract and transcode the episodes.

you need both meathods beause some blurays just make it difficult. one of those two meathods always worked for me.


i like close to perfect quality so i use 18mbs bitrate video and 640kbs audio

if you need smaller file size video as low as 5mbs is not bad and 128kbs audio is ok too.


my file structure looks like this
HDmovies = 1920 x 1080 @ 18mbs or higher (blurays)
SDmovies = 1280 x 720 @ 5mbs or higher (DVD)
TVersity = 1280 x 720 @ 4mbs or less (all of my content redone for tversity)

i cant get tversity to show movies over 4GBs

i basicly get 50 blurays per 1 TB.
 
What graphics card are you using for your htpc? Did I miss it stated some where? I have that same tv and want to get the Nvidia 3d glasses. Do they work well for normal 1920x1080 movies?
 
i use a GTX 465 you missed it but not big deal. i use 3Dvision with it and its top notch. it is the neat thing since sliced bread! i really love it. i play game with it and watch Bluray 3D with it.

For bluray 3D and that TV you need some patients! it works and works great but it may take a min to get it working. once you get it working the first time it works all the time. gets better support i have noticed with every new Driver update!

i play games on my HTPC reason i have that video card in it. i love playing games with the 3Dvision and a 65'' TV
 
3. open Pavtube bluray converter ultimate and add the folder
4. i use MP4 container with 18mbs and AC3 audio at 640kbs

Barf!

18mbps? You're just throwing away bandwidth on 99% of your movies, especially anything under 16:9 or without a BOATLOAD of grain. Either do a real encode, or at the very least remux the video with core (or DTS-MA/TrueHD/PCM to AC3 encoded) audio
 
you just wish you had the bandwidth and storage to do it. anything less then 18mbs you can see the difference. HDD $100, gigabit network $500 having close to bluray quality priceless
 
you just wish you had the bandwidth and storage to do it.

:confused:

I've got a 24TB home server. I have plenty of space, and it is filled with plenty of Blu-ray encodes, most of which are under 18Mbps (Save for the occasional super grainy flick like Saving Private Ryan), and ALL of them are indistinguishable from the source. The only reason you can see the difference in anything under 18Mbps is because you're using shitty encoder that's using generic presets. No self respecting encoder would use something called "Pavtube bluray converter ultimate"

Mock me if you want, pretend like you know what you're talking about, but if you want "close to bluray quality", you need to switch to encoding with MeGUI and x264. If you have all the storage I "wish I had", you should be remuxing them and keeping the untouched original video tracks. Are you even aware that some Blu-rays have video tracks that are barely, or under 18Mbps? Ninja Assassin comes to mind. You could be throwing more bitrate at your encode than the source has!

Read up, maybe you'll learn something: http://forum.doom9.org/showthread.php?t=141582

It's a little dated, but FAR better than what you've been doing
 
If you have all the storage I "wish I had", you should be remuxing them and keeping the untouched original video tracks.
I second this. I re-mux untouched video, hd audio and english subs into mkv's, taking out all unnecessary tracks. Still big files, but much quicker than reencoding and space is cheap these days.
 
Yeah, I use MakeMKV to do that. I have so much disk space that it's a non issue.
 
MKV and what i do Looks and sound exactly the same. bluray even doing side by side looks exactly the same.

if your using a "much lower" Bit rate then the quality is much lower. it looks good at 5mbs and uses way less space. I decided against that.

Reason i dont use MKV has nothing to do with the size but for some reason streaming MKV over my networks stutters.

At first thats what i was doing using MakeMKV keeping only what i wanted but when my family all want to watch TV and they all start pulling from the server it slows down. in 18mbs MP4s everything just works so well. my macs and pc both play them perfect. its easy to do all the transcoding and sence i OWN all the movies on my HDD i can always get the disk out. the quality is no different so i dont bother but the option is there.
 
You're doing something wrong then with your $500 dollar GigE network if you get the stutters.
 
You're doing something wrong then with your $500 dollar GigE network if you get the stutters.
Yea that sounds weird. I stream MKV's over GigE all the time, and these are full BD rips remuxed into MKV containers. I'd suspect a playback issue
 
do you stream 5+ at the same time from your server? thats when i get a problem. my home is wired with 1000Base-T with a 24 port Switch.
 
if your using a "much lower" Bit rate then the quality is much lower

*Facepalm*

No, it's not. Did you even read anything the link I posted? How about we compare encodes? What kind of SSIM scores are you getting on yours? Let's see some logs

Reason i dont use MKV has nothing to do with the size but for some reason streaming MKV over my networks stutters.

MKV is just another container. You can do everything we said and not use MKV. If you're getting stutter with MKV and nothing else, something is wrong with your computers, not your network. 18Mbps is barely over 2MBps. You should be able to run numerous streams
 
Looks like things have changed a bit! the main reason i use pavtube is everything works and works well. i have had a bluray drive in my computer for a long time. i have also been storing my movies on my HDD for as long too. DVDs just about anything does well. for blurays it becomes more of a head ache. things have changed a bit because now Handbrake finely giving me very good quality at a much lower bit rate then the pavtube i use! i am also able to include HD audio. the process i am playing with now is as follows:
1. AnyDVD to get the movie on the HDD
2. Tsmuxer to remove the HD audio
3. Handbrake to convert the M2TS file to MKV and to compress the video
4. MKVmerge to put the MKV file and the HD audio back togeather

Final result is 8333kbs video and 5324kbs audio average size is between 5Gb and 10Gb

DVDs just use Handbrake with AC3 pass though

Final result is around 2000kbs video and 640kbs audio for between 1Gb and 2Gb
 
Back
Top