HP w2207 brightness issue "video"

Majed

Weaksauce
Joined
Jun 26, 2007
Messages
102
I have HP w2207 LCD.
the half "bottom" of the video is soo bright.
the Only way to make the Video equal in brightness is to set the video"directShow" to "Haali's Video Renderer", "also this mode does not support full 1080p resolution."
any thing else the brightness is unbearable.
yes i can adjest the brightness and Gamma through nvidia CP. but i can't get the optimum result.i have to lose some brightness & gamma to get close result like "Haali's Video Renderer".
any one here own this LCD can solve this problem for me?
in the future i will by ColorVision Spyder2 Express so until then what should i do?

Thanks in advance.
 
Already owned this monitor and a spyder2. Spyder2 is not capable of calibrating this monitor, the profile it creates has worse color than factory default, you get a awful red tint instead of factory blue tint. Change the RGB values by hand in the OSD. Lower Blue from 255 to something like 224 and possibly drop green some as well. It's probably best to just stare at a white background with all lights off in the room while moving the sliders to find a neutral whitepoint.

Actually I take that back, a spyder2pro can probably calibrate it because theres an option to determine white point by using the RGB sliders but a spyder2express is useless for this monitor.

As for video color, that doesn't have anything to do with the monitor, it is VMR7/VMR9 rendering (default in vista), xp uses overlay. Open nvidia control panel and change video color settings from 17% default gamma to 13-14% then change saturation from 50% to 58%
 
thanks 4 ur reply.
will try your advice to calibrate the colors.
and i see the price of spyder2pro is more expensive than the express.
is it worth?
and for the video color,i did what you say but still there's a slight brightness, no near the "Haali's Video Renderer"" which is better.
maybe i need to try alot.

But…Why I didn’t get this problem with my CRT Sony G520? Just with the LCD ??

--------
i set the video to "Overlay" after clean system install, it works good but disable the Aero. good for video.
but video in games still there.
 
Does this only happen while watching videos? Does your desktop display any of the problems you mentioned?

It could be back light bleeding.

Make sure you look look at a full screen black wallpaper or picture. Don't turn off the monitor since you want the back light to show.

Now eye the LCD, if there's little bleed coming from the top and bottom then that's one of the traits of TN panels. If there is very noticeable amount then you might want to return it for another one. The HP I bought has uniformed back lighting and I can't see any bleed.

Also the Spyder Express is perfect for this LCD. Made a jump from colors from good to great on mine.

If not then it could be some other setting in your software (Nvidia, Ati, Win DVD, Power DVD) or you may have to reisntall the video decoder you're using.

Roach's problem with his Spyder is just an isolated one. Look around on this forum and you'll see people have had great results with it.
 
Back
Top