• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

HP SCSI LTO Drive

D

dx2

Gawd
Joined
Jan 6, 2005
Messages
545
We already have a disk-to-disk back-up san in place, but we are across a wan connection so we are installing an additional SCSI LTO tape drive....this scsi chain needs to be terminated like any other, correct?

The drive is an external HP Storageworks 460 Ultrium LTO 2 connected to a HP U320 Single Channel SCSI card.

Thanks for any help.
 
Yes - you will need a terminator to plug onto the second connector on the external tape unit or the last device on the chain if you have other devices connected after the tape unit.
 
The golden rule of SCSI: Every SCSI bus must have exactly two terminators. One at each end of the bus. Words to live by :D
 
You must log in or register to reply here.
Back
Top