• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

HP s7210n problem ....

C

ClockerX

n00b
Joined
Mar 31, 2008
Messages
19
Hi, I have a HP s7210n Slimline . AHd it for about 2 years but recently it stays on for about 15 minutes, and then the monitor reads "no signal". The power LED stays on, so does the motherboards. I don't know if its the onboard (vga) graphics in the motherboard that loses the signal. Maybe its a motherboard malfunction? The powersupply is narrow and long, not the standard ATX Psu's and uses a small version of a 24-pin connector so i couldn't use the standard PSU to test it. Say it is a motherboard problem, would a microatx hole alignment fit, then again i would have to check if the lga 775 oem cpu fan would fit? The Hp motherboard uses a socket 479 mobile processor with a heatsink, the cpu fan is in a tray thats above the board. Anyway, any of you experts may have an idea with whats wrong? Let me know, thanks

Edit: also if i may add when the video signal is lost, the cd drive does not open, so its a psu problem?
 
You must log in or register to reply here.
Back
Top