HP Comware A5500 IP Routing?

JosephH

n00b
Joined
Sep 3, 2011
Messages
10
Hi guys

I'm a student at university, they use a mix of HP E2910s and A5500s for switching labs. I'm currently on semester 3 of the CCNA curriculum so I got a deep knowledge of Cisco IOS.

I've got a really awkward lecturer that doesn't help at all during the labs, we're setting up an inter-VLAN routing scenario and having an A5500 as the route switch. He's provided us with the command to enable interVLAN routing on an E2910 but I'm struggling to find the similar command for the A5500.

I've had a deep look on Google and beyond and still can't find anything, is there anyone that could shell some light on this? Or if there's a different method of doing this? I've configured inter-VLAN routing on Cisco equipment so I understand the basic idea of it.

Cheers
 
On the 5500, you'll need something like this:

VLAN 10

VLAN 20


Interface vlan 10
ip address 10.x.x.x 255.x.x.x

Interface vlan 20
ip address 20.x.x.x 255.x.x.x


I don't think there is a specific command to enable IP routing like there is on the E series.

Also, the manuals:

http://h20000.www2.hp.com/bizsuppor...kId=101&prodTypeId=12883&prodSeriesId=4174795

The configuration guides are very useful, the command references, not so much.
 
Okay I think that makes it a bit clearer than how the lecturer wrote it down.

I understand how an IP address needs to be assigned to the default VLAN interface on switches, but on our lab diagram we're told to assign corresponding IP addresses to all the VLAN interfaces on the network for the route switch only.

Do I have to carry on this for other switches that have VLANs on them? I can provide a picture of the diagram if that's any help.
 
Diagrams are always helpful.

You assign an IP to the default VLAN on the edge switches so you can manage them inband; through the web browser, telnet, whatever.

You assign IPs to the various VLANs on the core switch so it can route traffic between VLANs. Those IPs can also be used for management, but you need them for routing.
 
Update from today's lab, we're told to construct a table of information based on the information in the diagram. However he said there's one piece of vital information missing from the diagram. We've all had a real good look but are struggling to what it could be. If anyone's got any idea it'll be greatly appreciated since I doubt we'll ever get told.
 
Back
Top