How's my --incomplete-- rig?

bumjin

n00b
Joined
May 29, 2007
Messages
31
Hey folks, new to [H]ard|Forums but I've been lurking for quite some time. I am in need of a new computer since my old one is about 2.5 years old and I figure that it's about time for a complete new rig.

I plan on purchasing the whole package if the rumored Intel price drops on C2D and C2D Quad processors are true. :D

Keep in mind, I'd like to have a semi-high end rig with everything on stock speeds and QUIET but would like to have the possibility of OC'ing in the future in order to keep a peace of mind.

Here's my incomplete rig and suggestions or recommendations are welcome.

Case: Antec P182
Processor: Q6600
Cooling: Thermalright Ultra-120 eXtreme
Motherboard: Suggestions/Recommendations needed.
Ram: Suggestions/Recommendations needed.
Video Card: Suggestions/Recommendations of brand name for GeForce 8800 GTX
HDD: Preferably 500+ GB
PSU: Corsair HX620W
120mm Fans: Suggestions/Recommendations needed.

I have no need for sound card since I already have one. Same goes for DVD-RW drive.

Thanks for taking your time reading this and it's nice to be a part of [H] community.

P.S. My budget is around 2000-2500$
 
Get yourself a Raptor for windows and all your programs and such, then a 500GB HDD for everything else.

Noctua fans are expensive at bout $20 a fan, but from what I've read, they're the best.
 
I suggest you get an Evga 8800gtx, that way you can use the step-up program in the future to get an 8900gtx/gts/whatever.

I second the Noctua fans. The 120mm, 1200rpm model pushes around 60 cfm @ 25 dBa.

http://www.silentpcreview.com/article695-page4.html#noctua

P35 boards are at Newegg now, Gigabytes DS3P is only $180. If you can afford it, the Asus P5K Deluxe is $220.

This ram is only $120 after the MIR. That's pretty good IMO for a 2gb set of 1066mhz ram, especially since it's D9GMH-based.
 
Hi all. Just got back from vacation so it's been a while since I posted.

Anyway, I agree about getting an EVGA 8800 GTX card. EVGA is known to have the best warranty and support for nvidia based products. (although XFX is good too.) They also have the 90-day step up program, so that if a better card comes out with in 90 days of your purchase, you can upgrade to that model paying only the difference in purchase price.

For a motherboard, definitely look at the P35 based Gigabyte DQ6 or the ASUS P5K/Deluxe. They're a bit pricey as they're based on a new chipset, but they're generally faster than the last generation P-965 boards. They also have guaranteed support for 45-NM Peryn processors, so if you want to upgrade to a mature, fast, and quiet quad in the next year or so, you wont have any problem doing so.

Agree that Noctua fans are good. Yate Loons are popular for a cheaper price, but they're not as quiet.

Good luck,

Mark.
 
I'd drop the quad to a dual and wait for the 'true' quads, but that's personal preference.
 
Thanks for recommendations/suggestions and I'll definitely look into EVGA video cards.

Looks like a couple of folks here recommend the Asus P5K Deluxe mobo and I will definitely look into that... same goes for the Noctua fans.

silent-circuit - Intel Q6600 isn't a true Quad core? Well, I am looking into something that's future proof and I heard penryn is coming out but I have no clue when and how much it'll cost.

Any more recommendation or suggestions for RAM or HDD?

Thanks all and again thanks for the heads up about warranty and step up program.
 
No, it's not a true quad, the Q6600 is made by sticking 2 E6600 dies in a single package. "True" quad core cpu's (ie: a quad with all 4 cores are on a single die) arent going to be available until Penryn and Barcelona are released. There's really no reason to wait for the true quads. Especially since the Q6600 is going to be $266 by July 22nd.
 
Look at the Seagate 7200.10 series or the WD AAKS series. Raptors are getting cheaper and cheaper, so pick one up for your system drive, as someone suggested earlier, if you don't mind spending that much for a drive. BTW, the raptor is about 20% faster, but about 4x the price (7200.10 320gb seagate ($80, 65MB/s avg transfer) vs 150gb raptor ($160AR, 78MB/s avg transfer)).
$80 - Seagate Barracuda 7200.10 ST3320620AS 320GB 7200RPM SATA300 16MB Cache

I'm getting tired of saying this, but you really don't need DDR2-1066 with a Q6600. At stock speeds, your ram will be running at DDR2-533, and its useless to OC only the ram without OC'ing the CPU. Even if and when you plan to OC, you still wont need that high speed ram because quad cores don't like high FSB speeds (DDR2-1066 implies a base FSB of 533Mhz). Here are the calcs:
Q6600: 9 * 266 = 2.4Ghz, DDR2-533, 1066Mhz effective FSB << stock
Q6600: 9 * 333 = 3.0Ghz, DDR2-667, 1333Mhz effective FSB << typical/easy OC
Q6600: 9 * 400 = 3.6Ghz, DDR2-800, 1600Mhz effective FSB << prolly need water cooling and some luck

So, go for some DDR2-800 sticks. DDR3 isn't mature enough to notice any advantages, so don't bother with it for now.
$82 - G.Skill 2GB (2x1GB) DDR2-800 F2-6400CL5D-2GBNQ
$230 - G.SKILL 4GB (2x2GB) DDR2-800 F2-6400CL5D-4GBPQ

I'd look into the lower model P35 boards, because I believe spending more than $150 on a motherboard is ridiculous. Check out the P35-DS3R.
$140 - Gigabyte GA-P35-DS3R LGA 775 Intel P35 ATX

The native quad cores are supposed to debut in Q1'08 at very low prices, to help fuel the move to multi-core. We're talking the same price as dual cores are right now.
 
Back
Top