How to format a second hard drive within Vista?

Joined
Oct 29, 2003
Messages
945
I just installed a new SATA drive to act as a data drive inside the computer. The problem is that I don't see any option to format the drive. That option is greyed out. Instead, the only option that I see the minute the drive was installed and Vista was installing the driver for it, was whether to use MBR or GTUIP for the partition volume. I picked MBR and then I still don't see the availability of the format option. The next step was to pick to pick "new simple volume", select NTFS as the file system and use default for the allocation unit size. I also checked "perform a quick format" and that made the format a lot faster. Next thing you know it seems like the hard drive was ready and that I can copy files into it. Did I do things properly? Why wasn't the format option available in the first place? Did you guys used MBR partitioning? What happens if I didn't check "perform a quick format"? What are the consequences? I would appreciate if all of my questions are answered. Thanks!
 
Drives need a partition table to keep track of the partitions
GPT is the new format for partition tables (supports 2TB+), MBR was the old method (<=2TB)
simple volume created a single partition over the whole disk. Intricies are beyond me
quick format formatted the drive, assuming that it decently formatted already, just wiping the partition table clean. (instead of a full format, actually writing out each sector.)

if you dont quick format the drive youd need to format it. I use normal formats, but that may just be habit. :shrug:
 
Drives need a partition table to keep track of the partitions
GPT is the new format for partition tables (supports 2TB+), MBR was the old method (<=2TB)
simple volume created a single partition over the whole disk. Intricies are beyond me
quick format formatted the drive, assuming that it decently formatted already, just wiping the partition table clean. (instead of a full format, actually writing out each sector.)

So I should have picked GPT instead of MBR? How can I change it from MBR to GPT?

if you dont quick format the drive youd need to format it. I use normal formats, but that may just be habit. :shrug:

I did a normal format while I was asleep. I think that took 3-4 hours to do, but it's ok. I slept for 9 hours today.
 
So I should have picked GPT instead of MBR? How can I change it from MBR to GPT?
I did a normal format while I was asleep. I think that took 3-4 hours to do, but it's ok. I slept for 9 hours today.
Pull your data off the drive and hit the convert button.
 
Also does it matter what the drive letter is for the internal drive? Even though I formatted the disk going using the new simple volume wizard, can I remove the hard drive and use it on another computer and the drive letter and settings being recognized on another PC?
 
Also does it matter what the drive letter is for the internal drive? Even though I formatted the disk going using the new simple volume wizard, can I remove the hard drive and use it on another computer and the drive letter and settings being recognized on another PC?

Driver letters are tied to OS, not the drive. E.g. old box boot drive (C drive) in new box is obviously not C.
 
So even though the "New Simple Volume Wizard" asks me for a drive letter, you're telling me that the drive will probably have a different drive letter once it's plugged into a different system?
 
Yeah. E.g. I used to call my F drive "F drive (F:)"

Of course, the second I upgraded to a new box, seeing "F drive (G:)" started to be confusing. I ended up giving better descriptions to avoid confusion.
 
I'm just wondering if you are using an internal drive or an external drive? I find it odd that I never had the format option available to me when I first plugged in my hard drive. The first thing that appeared was whether to use an MBR or GPT partition. Then I only see one logical option and that was the "New Simple Volume" option and it was there where I configured the drive. Did that happened to you as well?
 
MBR is what just about everyone uses. GPT is still new and mostly unknown. It doesn't matter if you pick GPT as long as you're not trying to boot from the drive. MBR is safer though since most disk utilites don't know what to do with GPT, and won't recognize the NTFS filesystem(s) on the drive.


Formatting is writing the filesystem structures onto the drive. A quick format does only that while a full format does that and also wipes the drive. A quick format in most cases is perfectly fine. It's the method I almost always use since I don't like wasting an hour or more doing a full format).

Drive letter are determined by the OS, not the drive. If you take it out and put it in another system, chances are it will have a different drive letter depending on what drives are already there. If the letter was determined by the drive, there would be problems if you tried to stick two "E: drives" in the same system.
 
I'm just wondering if you are using an internal drive or an external drive? I find it odd that I never had the format option available to me when I first plugged in my hard drive. The first thing that appeared was whether to use an MBR or GPT partition. Then I only see one logical option and that was the "New Simple Volume" option and it was there where I configured the drive. Did that happened to you as well?

Can someone please answer my questions above?
 
Back
Top