how stop restart after turn on

erasure

Limp Gawd
Joined
Feb 21, 2010
Messages
222
new motherboard just turn on right
but after OCing all my motherboard one time restart then turn on
it problem from motherboard or cpu or memory?

i flashed new bios and all default settings still one restart then turn one

how i just turn on without restart, like new
 
What board is it?
Does boot up for 1-3 seconds then reboots?

My Gigabyte P45-DS3 boots up then reboots after 1-3 seconds but the overclocks are all still working. It only happens sometimes though.. unsure why.

Possibly check how you mounted your board, it could be slightly touching other metals.
 
yes 1-3 sec after reboots
i used Evga X58, Asus X58, Asus X38 etc..
they all goes like that after OCing
 
If you don't have a chance to go into BIOS, you gotta take the battery out then reset CMOS via jumper. See your MB manual if you can't find it.

Hopefully it wasn't a bad flash or you're gonna need a RMA.
 
Last edited:
i can enter bios & change all settings

it's just when i power on my computer turn on 1-3 sec after reboot then works fine

i just want to stop that reboot
 
i can enter bios & change all settings

it's just when i power on my computer turn on 1-3 sec after reboot then works fine

i just want to stop that reboot

That reboot on a gigabyte board means the OC failed and it went into backup settings. Just tune your main settings correctly and it shouldn't reboot .

If what Greeneye says is correctly, there might be exceptions, though after the reboot just go into bios and look to see if it went back to defaults. That should be enough to tell you what happened.
 
Back
Top