Airbrushkid
2[H]4U
- Joined
- Aug 27, 2007
- Messages
- 2,430
Long story. Have 2 power supplies. Connect using a Dual Power Supply 24-Pin ATX Motherboard Adapter Cable. Everything was fine for months. I decided to replace the older power supply with a new Corsair HXi 1000. All connected. But took several try's to get rig started. But after running for say 30 minutes to an hour, the rig would reboot by itself. The problem is it would hang at a black screen. I would have to power off and reboot several times again to get started. So this morning I got home from work and decided to try something different. I unplugged the new HXi 1000. Now the seems to run fine. But I need the second power supply up and running. For 4 of the video cards. I not sure but I think that the Dual Power Supply 24-Pin ATX Motherboard Adapter Cable is messed up. So I want to try the paper clip trick. And if it works I like to know how safe it would be to leave the paper clip in the 24 pin connector? The rig runs 24/7. I would cover the paper clip with tape. And I would be getting another new Dual Power Supply 24-Pin ATX Motherboard Adapter Cable asap.
Thank you for any help.
Thank you for any help.