How outdated am I?

CoRPS

[H]ard|Gawd
Joined
Feb 19, 2004
Messages
1,389
Well, I haven't really been into the whole computer thing for quite some time. Mainly because I'm broke but also because lately there have been way more important things then this computer :D

How outdated am I?!

AMD XP 2600+
Random Shuttle mobo
1x512MB Kingston HyperX 3500
2x256MB Geil PC3200
2x60GB Maxtor IDE
XFX GeForce 6200 256MB

I used to run World of Warcraft easily on this system, will Burning Crusade be anymore hard on my system then the original?
 
Burning Crusade is just a expansion pack AFAIK so i dont think it should be markedly more stressful...

How dated are you? Pretty damn dated m8.... but if its still floating your boat I would say stick with it. However, find a modern computer for comparison, I'm sure it will blow your socks off.
 
How well do you run WoW your settings can't be much higher than extreme performance.

Your pretty outdated for sure. If you got some spare cash i'd say start looking to build a new system. You must be thinking it if your asking the question. My rule of thumb is once you start thinking about it there must be a good reason so its time to start upgrading.
 
Welcome to my world.

Your hard drives are using legacy connections, IDE is dead.
Your ram is outdated, DDR is dead.
Your processor is using a now defunct socket type.
Graphics card uses a connection that is no longer included on anything, AGP is dead.

Fooey on new technology.
 
How well do you run WoW your settings can't be much higher than extreme performance.

Your pretty outdated for sure. If you got some spare cash i'd say start looking to build a new system. You must be thinking it if your asking the question. My rule of thumb is once you start thinking about it there must be a good reason so its time to start upgrading.

I run WoW pretty well, no lag, runs smoothly. I can't tell you anymore then that since it's been about a year since I've played and it's no longer installed on my computer. However, since BC came out I've been toying with the idea of starting up again. If my computer can still run WoW correctly i won't be buying anymore hardware for it. No need to.
 
My Roommate hasn't noticed any difference on her machine yet, keeping in mind her guild hasn't done any 40-man raids since BC yet - they all seem to be busily leveling up to 70. Pre-BC, She had slideshow-worthy framerates in certain parts of the big raids.

She has an Athlon xp1500, ATi 9800 LE, one gig RAM.
 
Well, I haven't really been into the whole computer thing for quite some time. Mainly because I'm broke but also because lately there have been way more important things then this computer :D

How outdated am I?!
your fine
AMD XP 2600+
Random Shuttle mobo
1x512MB Kingston HyperX 3500
2x256MB Geil PC3200
2x60GB Maxtor IDE
XFX GeForce 6200 256MB
nice, I run something very similar, gives perfectly tolerable fps. Might consider a new graphics card.

I used to run World of Warcraft easily on this system, will Burning Crusade be anymore hard on my system then the original?
no. same engine. same (low :( )poly count, same textures. you should be fine.

anything upward of a 6600GT or X700 will just kill wow. Member, though they may be older, the Atholon XPs keep up to all the pentium 4s in benchmarks, aside from maybe some uber clock ceader mills. So, if you really wanna make a hard core gaming rig outta your system, pick up the new X1950 PRO. That card is too schveet for words.
 
Welcome to my world.

Your hard drives are using legacy connections, IDE is dead.
Your ram is outdated, DDR is dead.
Your processor is using a now defunct socket type.
Graphics card uses a connection that is no longer included on anything, AGP is dead.

Fooey on new technology.

I was in that world.... until about an hour ago.

Yes, people, the resident tightwad hath opened his wallet!

Just picked up a hp a1630n floor model for $750. Throw in a new graphics card, and the rig to be set up later tonight will be:

X2 4600+
2GB DDR2
250gb SATA hdd
DVD burner
512mb 7950GT OC
ZyXEL 802.11g card (they always seem to work best with my D-Link router)

All for around $1000.

The system I am typing on right now:

Barton 2400+
1.5GB PC3200
2x200GB PATA
256MB X850Pro

Monitor is a Viewsonic VA1912wb 19" widescreen (1440x900)

One item I do disagree on is that AGP is completely dead. You can now buy a 256mb 8XAGP X1950Pro for under $300. CompUSSR had them in stock tonight.
 
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO

but seriously, dealing with HP is not fun.

shoulda gone BYI T.T

I looked at it this way: My old computer is running on fumes. The $749 for the computer includes an upgrade to Vista Home Premium, which would be around $200 by itself.

Are you saying I could build a X2 4600+ 2GB DDR2 system for under $550? Factor in a new HDD and video as well for BIY as I have all PATA and AGP in the Barton.

Edit: Make that $500, not $550. Didn't notice that I got a MIR receipt ticket for another $50 as well.
 
word of warning, don't go too crazy with the Video card as I am sure that thing has a crap PSU. :)
 
I looked at it this way: My old computer is running on fumes. The $749 for the computer includes an upgrade to Vista Home Premium, which would be around $200 by itself.

Are you saying I could build a X2 4600+ 2GB DDR2 system for under $550? Factor in a new HDD and video as well for BIY as I have all PATA and AGP in the Barton.

Edit: Make that $500, not $550. Didn't notice that I got a MIR receipt ticket for another $50 as well.

the thing is you get a crap mainboard.

I member my vio, on clearance (like 70% off). had some SIS chipset which i knew supported AGP 8X. it was a northwood with 512Mb ram (which was good at the time right). i bought it, with the plan of sticking an X700 PRO in it. low and behold, they never bothered to sauder on the actual bracket. The Chipset supported it but, the bracket was never saudered on. just imaging how pissed I was.

but yeah, thats a pretty good deal.
 
the thing is you get a crap mainboard.

I member my vio, on clearance (like 70% off). had some SIS chipset which i knew supported AGP 8X. it was a northwood with 512Mb ram (which was good at the time right). i bought it, with the plan of sticking an X700 PRO in it. low and behold, they never bothered to sauder on the actual bracket. The Chipset supported it but, the bracket was never saudered on. just imaging how pissed I was.

but yeah, thats a pretty good deal.

This one is an ASUS board, nforce chipset.

I have only run into one issue, and it's an odd one.. The system SELF-OVERCLOCKS. It thinks the CPU is a 5200+, and of course the stock tin can/pinwheel they call an HSF can't cool it. Of course, being an OEM BIOS there is no way to change it, and there hasn't been a softfsb update since Christ was a cowboy.

Later today I'll put a better one on there.
 
Picked up the HSF.. Zalman CNPS9500AM2. Have to give them credit for the mirror finish on the CPU block.

Very soon, we'll see if the motherboard is reading it wrong... or if hp gave me a higher CPU than it was supposed to have.
 
Is IS a 5200+. 5200IAA6CS.

Guess that makes this system an even better deal, eh? :)
 
This one is an ASUS board, nforce chipset.

I have only run into one issue, and it's an odd one.. The system SELF-OVERCLOCKS. It thinks the CPU is a 5200+, and of course the stock tin can/pinwheel they call an HSF can't cool it. Of course, being an OEM BIOS there is no way to change it, and there hasn't been a softfsb update since Christ was a cowboy.

Later today I'll put a better one on there.

Thats Asus's AI + Intel's Speed step kicking in. I would suggest you disable one or the other. running em both might cause issues. Id say your still fine tho. If it is 100% brick wall OEM bios then they know what there doing. If it breaks down, bust out the RMA, but i suspect your fine. overclocking a 4600+ to 2.6GHz isnt that big an overclock. Most platforms, and all Nforce platforms, can do that easy.

Boot up CPU-Z, tell us what it says, dont close it. Boot up Orthos, run it, a few seconds after orthos your CPU-Z should be reporting new speeds, what do they say?
 
Thats Asus's AI + Intel's Speed step kicking in. I would suggest you disable one or the other. running em both might cause issues. Id say your still fine tho. If it is 100% brick wall OEM bios then they know what there doing. If it breaks down, bust out the RMA, but i suspect your fine. overclocking a 4600+ to 2.6GHz isnt that big an overclock. Most platforms, and all Nforce platforms, can do that easy.

Boot up CPU-Z, tell us what it says, dont close it. Boot up Orthos, run it, a few seconds after orthos your CPU-Z should be reporting new speeds, what do they say?

If it is Speedstep kicking in, then I must have a real problem considering that this system has an AMD processor.. As for why it was crashing, the stock tin can/pinwheel HSF isn't up to those speeds.

With the new HSF, it is running at 51C full load.
 
Back
Top