How high should I be able to go?

Aelfgeft

2[H]4U
Joined
Jun 8, 2005
Messages
2,343
Athlon 64 3000+ Venice Rev. E6
Asus A8V Deluxe Bios 1014
1GB Corsair PC3200 ValueSelect C3

Now, the RAM:FSB ratios on this board are a little trickier, since they don't go by 1 to 1 ratios. Instead they go by DDR speed:FSB. Therefore, normally it would be 2:1 to represent DDR400 to FSB of 200. Calculating things isn't a big deal, but the board sure seems to have troubles with it. At the moment, I'm running at 223FSB, with a 5:3 ratio (next down from 2:1) and CPU-Z is picking up the memory at 200.7 MHz. Let's check our math:

223 / 3 = 74.33333
74.33333 * 5 = 371.66666 <--- supposed to be my effective DDR speed.

Hence, the memory would be running at 185.83333 MHz. Apparently my board is rounding up, which doesn't entirely please me. :mad:

Anyways, I tried going for the 3:2 DDR:FSB ratio, and cranked up the FSB to 260. Stuck at the Windows XP black loading screen. So did 250. I figured running my RAM so low just to get my CPU up would actually put less stress on it. Could it just be stiffness of my RAM? I'm also running a 431W Enermax power supply with only 20A on the 12V rail. Would that make a big difference at this stage?

I figure I could get higher than 2.0GHz at least.
 
Ummm have you read some of the a64 oc guides here?

The 3000+ Venice should easily get to 2500 Mhz with decent cooling a lot of people here run 2700 or more.

Anyway

Make sure that your HTT is less that 1000 Mhz for starters

Remember that your RAM speed is your CPU Speed / Mem Divider.

There is a chart around here somewhere that lists out the divider ratios.....

I'm kinda drunk so I wont go into more details unless I read this sober :p
 
Bump..still looking for some answers...above 230MHz FSB as well seems to make something weird happen with my RAID controller...detects my SATA hard drive wrong, with tons of weird ASCII characters.

And yes, I have read the guides. And lowering my HTT hasn't helped.
 
Do you have the MSI K8N platform?

There is a BIOS flash that fixes that. There was a problem where you couldnt go beyond 220-230 FSB
 
My OS is currently installed on my primary IDE drive. I've got a newer copy of Windows XP Pro coming in the mail, so I'm not reinstalling till I get it.

And my SATA drive is plugged into the regular black connectors.
 
actually you don't just divide the FSB by the ratio (5:3 you say) to get the mem speed. I forget how it works, ecplise has something posted about it in the mem forums. The multiplier plays a role I think. I forget the actual formula though, so you might want to go ask him.
 
Russ said:
actually you don't just divide the FSB by the ratio (5:3 you say) to get the mem speed. I forget how it works, ecplise has something posted about it in the mem forums. The multiplier plays a role I think. I forget the actual formula though, so you might want to go ask him.

Actually, that's how this board works. With most other boards, a 1:1 ratio would be 200FSB for both the memory speed and CPU FSB. However, this board uses the DDR rate for the memory, so full 200MHz PC3200 memory would be running at 400MHz, meaning a 2:1 ratio. So the numbers are different.

And as far as I know, the multiplier has nothing to do with RAM speed.
 
gg:
http://www.hardforum.com/showpost.php?p=1026972298&postcount=10<br%20/>
 
Back
Top