How Godly is this SSD?

Last edited:
As an Amazon Associate, HardForum may earn from qualifying purchases.
Fusion IO is uber, the closest you can get to it is ram drives. or certain 6gb/s raid cards can pull higher iops, but not the low QD performance of the fusion, of course.
lsi 92xx series boasts 2.857 gb/s read and 1.850 write speeds, with 4k randoms going into 160k IOPS, so you can get close with an uber ssd array on a lsi card. actually they will have much higher overall bandwidth, but in the lower QD the fusion-io reigns.
oh and the raid cards ARE bootable :)
 
and overall the raid setup is gonna be a whole shit ton cheaper :)
(sorry for the technical language)
this is from a review of the ioextreme, they compared game load times to that of the fusion-io
http://hothardware.com/Articles/Fusionio-ioXtreme-PCI-Express-SSD-Review/?page=1
ioextremescreenie.png


here are my game load speeds with the 9260-8i and 8ro vertex....
9260firstfirmeware.png


the noncon means nonconsecutive, meaning i close the game, then reopen game and load the game and time the first load.
the avnon is the average of the non consecutive loads

the cons1 2 3 are consecutive loads, after the game has been previously loaded, games tend to load faster after consecutive loads, so i wanted to see the differences.
avcon is average of the consecutive loads of the levels.

as you can see the fusion-io is good for some environments, but for game loads i think its lack of sequential doesn't help much, bearing in mind that seq access is 69 percent of game loads.
 
Last edited:
Still a traditional RAIDed setup - wait until you see REAL PCI-e to NAND controllers; then there's basically no limit on performance. A million IOps is certainly possible.

And of course we miss TRIM. It's a SSD setup behind RAID controller. If you spend your money on cheaper SATA SSDs and RAID them yourself you have the benefit of lower price, higher performance and still able to use TRIM on operating systems that support it (currently not Windows; but Linux and BSD do support TRIM over traditional software RAID arrays).

Still would love to see more PCI-e based SSD devices; but without hardware RAID chip.
 
I agree sub.mesa, there is a definite difference between the pcie solutions right now and the conceptualized version that lacks the onboard controller, which basically adds latency.
I was not aware of any solution currently that support trim in raid, if linux and BSD are doing it in raid 0 then i wonder why in the hell intel is waiting so long for trim drivers for the ICH? still a mystery to me why they cant get trim implemented correctly.

by 'software arrays' do you mean dynamic disks only?
 
Still a traditional RAIDed setup - wait until you see REAL PCI-e to NAND controllers; then there's basically no limit on performance. A million IOps is certainly possible.

The problem with PCIe SSDs is that they aren't hot swappable and their cost is prohibitive. The cost issue is one that isn't likely to go away due to their reliance on expensive FPGAs and volume outlook that doesn't make custom ASICs attractive.

Those that aren't FPGA based (aka not from FusionIO) are just cheap SSDs on a board connected to a cheap RAID chip.

For the same costs, you can get the same read/write performance and IOPs via raided SATA/SAS based SSDs. Which puts you on a more mainstream, and reliable curve.
 
Back
Top