How fast is A64 2.7 GHz?

HighwayAssassins

Supreme [H]ardness
Joined
Mar 2, 2004
Messages
5,210
Hey whats up yall. I just made the switch to A64, Venice 3000+. I got that bitch up to 2.7 GHz with 300x9. I ran super pi out to 32 million digits and im coming up with 28-29 minutes...and that seems kinda high to me. I was just wondering what 2.7 GHz should get me in super pi.

I also benchmarked my intel @ 3.6 with PCMark04 and the 3.6 intel scored higher in everything, but i chocked that up to PCMark04 being more intel optimized or something.

One possible cause is my memory, HyperX PC4000 (which i thought was rated up to 250...but cant hit that for some reason) Has to be divided down to 193 because its a piece of shit. Can slow memory account for these (seemingly) slow benches?

What kind of memory should i get for this computer anyway? I mean 193 isnt gonna cut it.

-Jon
 
HighwayAssassins said:
One possible cause is my memory, HyperX PC4000 (which i thought was rated up to 250...but cant hit that for some reason) Has to be divided down to 193 because its a piece of shit. Can slow memory account for these (seemingly) slow benches?
-Jon

Hell yes, especially in the 2 benchies that you have used. I don't see why you cant hit the rated speed with your RAM though, 250MHz should be nothing.
From what I remember (from the good ol' days..... :rolleyes: ) the Kingston HyperX 4000 uses Samsung TCCC modules. Someone tell me if I'm wrong....
Anyway, because it's TCCC, you should easily be able to hit 250MHz with only a little voltage. The thing is, you may have your latencies set too tightly in the BIOS on your motherboard (what is that, by the way?), and this is limiting your RAM overclock.
Kingston rates the HyperX at DDR500MHz with timings of 3-4-4-8. Anything else on this type of RAM, and you're likely to not get all that far.
Try downloading A64 Tweaker 0.5 Beta, and use that to tweak all of your RAM in windows, just to see how your stability is without multiple restarts. You can also use A64 Tweaker to set some dividers that aren't supported by your motherboard to try and figure out what the max overclock for your RAM is.
The ideal divider for you to use with your (hopefully properly functioning) RAM sticks is the 166/333MHz one. This should put your CPU at 300MHz FSB, and your RAM at the perfect rated speed of 250MHz.
 
If your RAM isn't pushing much higher than 200 for some odd reason, have you tried keeping it at 200 with fast timings like 2-2-2-6 ? My benchies for loose timings and higher frequencies on my cheap ass Corsair ValueRAM end up being the same as lower frequencies with tighter timings. Since the performance was the same I chose to keep low frequencies with faster timings because that somehow seems safer to me running my memory at closer to stock speeds.
 
You need some TCCD/TCC5 based samsung memory to really take advantage of your o/c. Run a few SiSoft Sandra benchmarks to make yourself feel better. Also if you are into gaming you should see some decent framerate improvements.
 
G.Skill "LE" is about the best out right now for ocing. I can run 295 just fine.
 
Back
Top