how do you unscrew damaged screws

Bad Seed

Limp Gawd
Joined
Feb 12, 2003
Messages
140
I was swapping cases, and got everything out of my old case except for my dvd-r drive. One screw is stripped and I cant do anything to get it out. I don't wanna damage this case, and the only way I can get at the screw is at a slight angle.

Please help!
 
Try a sharp tipped flat head screwdrivers, try to find two points that will grab.
Try the tip of a good pair of scissors, the odd shape will sometimes bite.
Try a pair of pliers to grab the outside edge of the screw, or the 1/2 of a tip inserted into the screw like a screw driver, the odd shape will sometimes bite.

Good luck.
 
If those don't work, the standard way of removing a stripped-beyond-hope screw is by drilling it a little bit. It will seperate the head from the body of the screw, and they'll both basically fall apart with a little man-handling.
 
I have yet to need a drill with the above, home brewed(things lying around the office that looked like they would fit :) ), methods. Besides, taking a drill to it might mess up the threads on the case.
 
I keep a set of easy outs for just such an emergency. They are great for getting out screws without causing damage. Slight angle probably will be alright but watch it closely.
 
you could also use your dremel with a cutting wheel and cut a big slit through it so the flat head screw driver can fit it. i did once for my r/c truck.
 
Craftsman makes some drill bits used to take out stripped screws and what not for your hand held power drill. Used those a couple times.
 
An old airline trick...use a little valve grinding compound, which you can find in any hardware or auto store. put some on the head of the screw and see if you can get enough bite to remove it. we always attempt that method first before drilling anything out and having to use extractors...good luck

twajetmech
 
phibers got the solution... that's the best way to remove a screw... saves damaging anything else other than the screw itself if you be careful enough.
 
The only time I would take a power tool to a case is if I'm modding it. The poster wants to save the case, so I would save power tools for last. ;)
 
getting out a dremel doesn't mean you're gonna ruin the case. Cut a new slot in the head for a flat head screwdriver. Done it many times. Just cut a slot in the top, insert, and go.
 
I hate to be the idiot who points out the obvious,

but is it one of those bigger case screws that can be removed with a socket or a wrench?

I made this mistake once, was trying for about an hour before I realized that I could just use a small wrench on the thing
 
Great thread :cool:

I used some pliers on a case screw and it worked fine with a bit of forearm brute force :D I also used a small jeweler's flathead to unscrew a stripped phillips head screw in a R/C car and that also worked. There are lots of spot on replies here :)
 
Originally posted by lopoetve
Cut a new slot in the head for a flat head screwdriver. Done it many times. Just cut a slot in the top, insert, and go.


thats what i always do
just cut a slot in the screw, then use a flathead to unscrew it
 
Originally posted by twajetmech
An old airline trick...use a little valve grinding compound, which you can find in any hardware or auto store. put some on the head of the screw and see if you can get enough bite to remove it. we always attempt that method first before drilling anything out and having to use extractors...good luck

twajetmech

Alright, somebody else knows that one.

I got a set of left handed drill bits for use with an extractor set and they are great. You either end up backing the screw out or drilling it out, either way problem solved.
 
If you do ever need to drill out a screw in a pc case, a dab of vasoline will keep metal shaveings from going all over the system.
 
Originally posted by Frosty_axe
If you do ever need to drill out a screw in a pc case, a dab of vasoline will keep metal shaveings from going all over the system.

Good advice. NEver heard that one, but I'm sure I'll get a chance to try it out sometime soon (new case coming for my HTPC).
 
Back
Top