How do you overclock "BOTH" cards while in SLI?

Mickelonis

Limp Gawd
Joined
Apr 8, 2005
Messages
203
How in the heck do you overclock both of your video cards and them put them in an SLI congiguration?

I have water cooling on both of my cards in SLI, and I'm beginning to think watercooling SLI cards is just stupid because you can't overclock them both.

-Mickelonis
 
That is the easy way, yes. The issue is that max clocks with a single card aren't likely to be max clocks with both cards in the loop, so... eh. Not sure.
 
Don't both cards have to run at the same speeds though?

That's why you test both cards extensively in a single-card configuration to see what speed they can easily handle. Then you can flash both cards to said speed and bam, there ya go.

People should do this with caution though, as was noted above running 2 cards in SLI at higher than normal clock speeds can introduce artifacting that wasn't at all present when the cards were running singly. This is why I usually find the max speed I find both cards will run at completely stable, and then back off that speed by like 5 - 10mhz for the speed I flash the BIOS with.
 
That's why you test both cards extensively in a single-card configuration to see what speed they can easily handle. Then you can flash both cards to said speed and bam, there ya go.

People should do this with caution though, as was noted above running 2 cards in SLI at higher than normal clock speeds can introduce artifacting that wasn't at all present when the cards were running singly. This is why I usually find the max speed I find both cards will run at completely stable, and then back off that speed by like 5 - 10mhz for the speed I flash the BIOS with.

and if you flash the bios it can void the warrenty too if im correct?
 
What utility do you use to flash? and is the ONLY thing affected when you flash is your core speeds?

no driver issues after you flash?
 
What utility do you use to flash? and is the ONLY thing affected when you flash is your core speeds?

no driver issues after you flash?

Make sure you have a spare PCI card to use for recovery if the flash fails. Good news is, a misflashed card is not a dead card, you just have to run it again.

I personally use the DOS version of NVFLASH (5.50 here) though there is a Windows version as well. There is a detailed "how to" here: http://www.hardforum.com/showthread.php?t=1199078&highlight

There is a newer version of NiBiTor, which I would suggest using rather than the one linked to in that thread.

And no -- no driver issues.

If running GTXs you can use this chart to figure out core and shader speeds.
8800gtx-core-shaders-table.png
 
i might be wrong, but AFAIK you can just use rivatuner or coolbits, the drivers should keep both cards in sync, thus overclocking both cards at the same time

Bios flashing for a simple OC is a bit overkill i think
 
Yeah, you guys are making this too complicated. :) When you overclock via coolbits or rivatuner, the OC is applied to both cards automatically.

I think the OP was asking why he doesn't have control of each card's clock speed individually. The answer is that you don't. . . but you don't really need it because both are overclocked when you set the single setting.
 
Yeah, you guys are making this too complicated. :) When you overclock via coolbits or rivatuner, the OC is applied to both cards automatically.

I think the OP was asking why he doesn't have control of each card's clock speed individually. The answer is that you don't. . . but you don't really need it because both are overclocked when you set the single setting.

I'm not sure I believe that this overclocks both cards at once. Do you have proof of this?
 
Make sure you have a spare PCI card to use for recovery if the flash fails. Good news is, a misflashed card is not a dead card, you just have to run it again.

I personally use the DOS version of NVFLASH (5.50 here) though there is a Windows version as well. There is a detailed "how to" here: http://www.hardforum.com/showthread.php?t=1199078&highlight

There is a newer version of NiBiTor, which I would suggest using rather than the one linked to in that thread.

And no -- no driver issues.

If running GTXs you can use this chart to figure out core and shader speeds.
8800gtx-core-shaders-table.png

I run 7800GTX's, does your advice still apply to this older set cards?
 
I'm not sure I believe that this overclocks both cards at once. Do you have proof of this?
Well, I don't have "proof". . . not sure how I would get such a thing (hard numbers, etc.). But this question has been asked many times, and that's always been the answer. This entry on the SLIzone.com FAQ seems to indicate that overclocking works in SLi via standard coolbits:

Can I use Coolbits for overclocking AND the expanded SLI functions?
With Release 90 or later ForceWare graphics drivers, Coolbits is no longer required for advanced SLI functionality. However, users can still use Coolbits to enable graphics cards with different memory sizes to work together in SLI mode. To enable this feature, along with overclocking functionality, set Coolbits to 1A.
This would imply that overclocking works in SLi via coolbits. Though I don't think you need to set Coolbits to 1A. Rather, that's if you want to use two different types of cards (RAM size-wise).
 
Back
Top