• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

How do I wire a game controller to USB?

T

Trackr

[H]ard|Gawd
Joined
Feb 10, 2011
Messages
1,786
I'm thinking of doing a PS1 PC mod, like the SNES PC mod, because the PS1 is my favorite console..

I've got most of the components down, but I'm just not sure how to connect the controllers..
 
Leave it outside and just connect it to the device via usb cable. You should mention you want to replicate the USB port to PS controller while it is inside the device.
 
Trackr said:
How am I going to fit this into a PS1 box? :confused:
Click to expand...

... you would disassemble it? You can probably find adapters that work for a single controller that might be slightly smaller, but you'll still have to disassemble it and try to fit the PCB inside the case, and you'll then have to get two if you want both controller ports to work.
 
EvanH said:
... you would disassemble it? You can probably find adapters that work for a single controller that might be slightly smaller, but you'll still have to disassemble it and try to fit the PCB inside the case, and you'll then have to get two if you want both controller ports to work.
Click to expand...

No, I think that supports two controllers.

I just thought there is a solution that would involve crossing and soldering some wires..
 
why not just use a bluetooth dongle and a few sixaxis controllers? it's compact and wireless :)
 
Trackr said:
No, I think that supports two controllers.

I just thought there is a solution that would involve crossing and soldering some wires..
Click to expand...

Not possible since they don't have the same wiring
 
You must log in or register to reply here.
Back
Top