how do i flash my bios..

Joined
Apr 10, 2002
Messages
3,306
i already typed this before, but didn't get any help

i have a gigabyte ga-6veml ... i downloaded the bios update from gigabyte... it is on a disk, and my hard drive

i can't flash my bios from windows..

there is a thing is the bios called.. bios flash protection... i can either set it to [auto] or [enabled]... which means it is always on no matter what...

the bios update consists of the following:
6VEML.F8
autoexec.bat
FLASH860.EXE

i can't boot from the disk..

the disk and disk drive are functioning properly

and there is nothing in the post screen to hit other than "del to enter setup"


how do i flash this son-a-bitch ??

the instructions on gigabtye.tw are in chinese or soemthing. cause all i get is squares..
 
You need to make that disk bootable, THEN transfer the files to it. IMO, the best way to do this is get a disk image and extract it onto the disk. This is because windows doesn't really support dos very well at all anymore... Try this:
http://www.mirrors.org/archived_software/www.bootdisk.com/winfiles1/622-514.exe or maybe http://1gighost.net/dosfile/622c.zip (you have to manually do this one.)

Put in the disk, run the program, and delete all the files on the disk but command.com, msdos.sys and io.sys. Oh, and since they didn't include a config.sys, I recommend you make a new one. Just a blank text file with absolutely nothing in it will do. The reason is that dos wants to change your date and time (causing a few seconds scew in the time it takes you to respond.) It's a minor annoyance, but, nonetheless, still annoying. After you've done that, just copy over the files you downloaded. Then reboot with the disk in the drive.

OH, btw. Make sure your bios is set to boot floppies. For some reason I can't yet quite figure out, most of them default to booting the hd first these days... Kind of defeats the purpose...

EDIT: Oops, I just remembered. Many newer motherboards are beginning to implement their own flash built in to the bios. If you have this, it's strongly preferable to use it as there's no way anything can go wrong short of things such as power failure or currupted images. If you have this, simply put the files on the disk (no need to make it bootable,) reboot, and hit the appropriate keys when the system starts up. In my case, I have to hold ALT+F2. Unfortunately, my floppy drive is worthless, so I don't get that option (not that there's a newer bios out yet for me anyway.)
 
why don't i put a win98 startup disk in... then eject it, put in the bios flash disk.. and then run it? i will try that first... ummm.. this is not a new mobo.. it is a few years old... scoket 370 that alt+f2 thing.. ummm.. someone else told me to look for something like that on the post screen.. i didn't see anything like that...
 
You can do that, but, why not just put the bios information ont he win98 disk? You see, if you switch like that, it will start fussing about command.com missing and possibly interrupt the process, a dangerous thing indeed. You want to maintain an absolute maximum of care in this or you end up with one expensive paperweight (probably cheaper to buy a new mb than to find someone with the equipment who can reflash it for you.) This is why everyone so strongly recommends only flashing if you truly need it.
 
ok.. i can't get either one of those programs you linked to work..
the dos one says "error reading image file" the *.exe says "the current image format is not supported by the floppy drive"

what needs to be on a floppy for it to be bootable? command.com, and what else?

edit, i found a win98 startup disk...
 
ok.. i am doing it, dis some scary shit...

i had to type the name of the bios flash instead of selecting it from a list..

and i didn't back up the old one.. buit it worked.. no paperweight...

and it didn't give me voltage controls, which is what i wanted.. damn....

can i get an unofficial bios for this thing??
 
There aren't that many unofficial bios releases out there. However, even if you did find one, I would strongly recommend against using one. Remember, one mistake in the right place, and you might not be able to get it to boot up far enough to reflash. As for backups, you can usually always download an older official bios, so usually that isn't going to help since you can just get one of those. If things go horribly wrong, having a backup won't make any difference anyway.

Which voltages do you want to change? If just the CPU, you might try modifying the bridges or doing the pinmod trick. I don't know of any way to do that for memory or the chipset though.
 
i want to raise the cpu votlage

the memory is 133 mhz.. . so i can do 133 stock.. but i am trying to get an 800 mhz celeron from 100 mhz to 133 mhz... so i am sure i gotta add a little voltage..
 
For this you can probably do the pinmod trick. It involves connecting appropriate pins together. This has an effect similar to actually modifying the bridges on the chip itself when possible. Basically, it modifies the information the board receives from the cpu when it tries to figure out what multiplier to set, however, there is a similar effect if you connect different pins where you change the voltage the cpu tries to use.

Do a google search. I remember finding a site before that gives you images. Of course, this was all done for an AMD system. I really know nothign about doing this with Intel. However, I would imagine it would be for Intel that such tricks are most necessary.

EDIT: Btw, you were talking about the bios option that can only be set to auto or enabled. The reason for this is just so you can force it to enabled. Auto is considered necessary for this type of item so that it can be enabled when it is deemed necessary (though perhaps in a few cases the user does have better knowledge of when that is.) In other words, auto can actually mean off if it isn't autodetected that it should be used.

I suspect that in the case of this bios flash protection, what it means is that those viruses that try to flash the bios to screw your computer should fail (probably requireing some kind of vendor code or something.) I could be wrong on this though.

Oh, and have you made sure the update actually worked? It might be possible for it to report sucess, but nothing happen if my previous guess was at all correct. When you boot up, it should report the version. If it doesn't, probably going into the bios setup will show it somewhere.
 
it reports that it is using the "F8" bios on the bost screen
the one before had some date from 2001 or something... so yeah.. i am sure it updated and is running the new bios..

i know of the pinmods for amd, but i think intel has figured out ways to eliminate this.. i have never seen an example of anyone doing a pinmod to an intel chip.. i guess i shouldn't complain.. i got the comptuer for free, not the memory though... but every thing else including the monitor... so what is a few hundred mhz.. this is my downloading / unsafe site surfer.. so i don't screw up my good comptuer..
 
With an intel, a few hundred probably doesn't matter. Especially since it will just underclock itself if you allow it to get too warm anyway. Heck, even with this thing, the difference between 2500 and 2000 wasn't exactly blazing (though it was just the perfect amount to get ffdshow right where I wanted it on 2500 and at 2000 I had to make painful compromises.)

Ok, what about this. There's a program called "CPU MSR." It's hard to find, so here's the homepage:
http://www.cpuheat.wz.cz/html/Tweaks.htm
I haven't had much luck with it myself, but, then I'm not exactly running your standard setup here... It can supposedly work with a P4, HOWEVER, it does require the mb have certain stuff to it that may or may not be the case. Don't worry though, since this is a 100% software solution, it's theoretically impossible that it could damage your system (though normally messing with such things in the bios can't either since it should just simply not post and never get far enough to cook the CPU with just oc settings.) I get freezes if I try to change the multiplier (probably my mb lacks the necessary things) and the vcore is listed as 1.45 max, so I can't even modify that without screwing things up if it did work, but, then again, as I said this is an unusual setup.
 
Back
Top