How are my Q6600 temps?

[Wildace]

I just installed it last night and took these screenshots its stock right now but i plan to overclock it to 3ghz 1333.

case - Antec 900
HSF - TuniqTower with As5
5 120m fans
1 200mm fan
all on low speed.

the as5 still needs to burnin so i took these pics to see if it goes down in a week or so of normal use.

idle

full load

 

[remmeh]

I don't personally own a quad but 40C load temps at stock are pretty gooood

 

[ignoramus]

Looks about right.

 

[Sabrewulf165]

Those temps are just dandy.

 

[Ocellaris]

What are you using to create the full load? Go with Prine 95 Small FFTs if you can, never seen my Q6600 get hotter than when running that.

 

[Wildace]

What are you using to create the full load? Go with Prine 95 Small FFTs if you can, never seen my Q6600 get hotter than when running that.

i was running prime 95, 25.6 i think

 

[Ocellaris]

i was running prime 95, 25.6 i think

Great temps then, what is your ambient temp?

 

[Zero82z]

Pretty good temps for stock.

 

[krameriffic]

My B3 Q6600 idles at around 40C, so yeah, it's good.

 

[Wildace]

Great temps then, what is your ambient temp?

probly between 65-68F, i dont know exactly

 

[beardawnwood]

good

 

[basso4735]

yup mine are pretty much the same, a little higher due to my 78-80f ambient.

 

[asiandunn30]

i have a G0q6600 vid 1.200 with sunbeam core freezer ..stock voltage at 1.14 and it idles at 29,30, 26,26....when load it goes to 45 ,45, 40 ,40...whats up with my temps when my voltage is lower than wildace...

 

[basso4735]

you might have higher ambient temps? or he has a better heatsink?

 

[Wildace]

i have a G0q6600 vid 1.200 with sunbeam core freezer ..stock voltage at 1.14 and it idles at 29,30, 26,26....when load it goes to 45 ,45, 40 ,40...whats up with my temps when my voltage is lower than wildace...

why my stock voltage so high.. yours is 1.14? mines close to 1.3 stock.

the AS5 already seems to be burning in pretty well.. Real Temp is now showing 23C, 25C, 22C, 23C Idle compared to 25C 26C 23C 26C friday.

 

[flak-spammer]

I highly doubt those temps are right, unless your room temp is 10-15C.

 

[Wildace]

I highly doubt those temps are right, unless your room temp is 10-15C.

i doubt real temp is right, core temp seems more likely to be accurate.

 

[asiandunn30]

i have a 12cm s-flex f on the exhaust , on the heatsink and an unobstructed intake blowing straight to the hsf..its a straight line of 1600rpm 60 cfm..ambient is 65f... i use realtemp that shows idle and low temps from my above post...coretemp is 5c difference same with speedfan shows 5c difference on all core...ive used the box fan method and that only gives me 1-2c difference...but my voltage with the G0 q6600 vid 1.200 is at 1.14 stock..and they higher voltage but less heat...those temps are also the lowest it can get read at night