How about this build?

DaveH

n00b
Joined
Jan 30, 2007
Messages
5
Gigabye 965P DS3
Conroe E6400
Mushkin 2GB Newegg link
Seagate 7200.10 320 GB
Sapphire X1950XT
PSU = FSP 450 watt Newegg link

Case and other accessories will be used from old computer.

i'm also thinking about switching the MB in the above config for a P5B deluxe with the mushkin memory although i don't really use the additional features accept for the better Raid controller in the future, or keeping the DS3 and going with G.skill HZ 2GB.

I intend to overclock to the max (have watercooling), however not so much on the graphics card.

BTW budget is around $1000

So, Bring on the experts.
 
looks pretty good, but to be honest, don't skimp on the psu. the power supply is more important than anyother component. :D

but otherwise, kickass! :D :cool: ;) :)
 
try the XClio goodpower 500w instead of the FSP. It's a few bucks cheaper.
 
Ok, thanks for the suggestions guys!

what about the MB memory combinations. see any possible problems? :confused:
Will the Mushkin memory be able to handle 900-1000 mhz? I guess that range will also be the limit for the CPU at 8x.
 
That XClio can support 30A on the +12V rail, so you should be good with a nice overclock. If you add anymore components, though, you'll need a stronger PSU, like the Corsair 520W (40A on the +12V rail).

Also, I've used the DS3 on several builds for people, and its a great board. However, people are experiencing a cold boot issue with the rev2.0 boards. I used several rev1 and rev2 boards (rev2 boards had the F7 BIOS), and have NOT experienced this issue. Check out the overclocking/cooling subforum for more info. I just wanted to make you aware of it.
 
Back
Top