Hitachi 5K4000 erratic perfromance

xenthressa

n00b
Joined
Jul 17, 2011
Messages
32
So I just got this 4TB Hitachi drive and I'm experiencing some odd behaviour.
I'm seeing a lot of drops in speed, and other times it's perfectly fine and the graph does not show any drops. In this example the read benchmark just shows a couple of drops in speed.

avjgKkS.png


And then other times it's a ridiculous amount of drops going on. Take for example this write benchmark:

OL9QrNa.png


SMART values are all fine:
AOxs1MC.png


The system is running on a high perfroamcen power option and none of the other drives are showing this type of behaviour. I find it very odd and I've replaced the sata cable. What could be going on here, what should I try?
 
Test the drive on a different PC if you can. If not I recommend testing under a different OS like a bootable linux usb stick.
 
Hey thank you.

I have booted a live environment off USB (posting from it now). I'm not able to benchmark the whole drive here (32bit limitation) but I am also seeing erratic drops in this environment.

Starting to think this is a hardware issue we're not going to be able to fix. I will try another sata cable just to make sure..
 
To clarify:

In this live environment it's also erratic. Sometimes completely normal results, sometimes erratic results. Very puzzling.
 
Seems like one of my sata ports or a certain cable is wonky or something.
I seem to have found the right combination of port and cable now...

Read
qGJ0Zqi.png


Write
roe7pqd.png


Will keep the thread updated once I receive my new case and am able to more easily swap cables in and out. Rather curious to do some more testing and find out what the *bleep* is going on. :eek:.
 
So I thought I had figured out but guess again. I ran about 10 consecutive benchmarks, threw in a reboot in the middle. All of them run normally until this happens:

zgIXDcV.png


Wait a couple minutes and I run the benchmark again and everything is back to normal. WTF.



Anyone have any input before I send this thing back as a DOA? :confused::confused::confused:
 
Just tried v5.50, exact same situation occurs. Benchmarks fine for X amount of runs and then poof readings all over the place :eek:
What other benching tool would you recommend?

-Edit

Tried crystaldiskmark. After about 8 consecutive runs with similar results the same problem occurs.

Good:
c0Men3f.png


Bad:
mNAD4yi.png


Going to call up the supplier tomorrow and see what they think. It's not necessarily something I'm going to notice but it feels like this may be the start of something deteriorating.
 
Last edited:
Back
Top