![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
boardsportsrule
[H]ard|Gawd
- Joined
- Nov 27, 2003
- Messages
- 1,107
ok, so i have finally snapped, after seeing all these 2.5+ghz oc's i must get there! but cheaply any ways, here is my issue, and my idea for fixing, but i really would like some one to slap me and tell me im wrong(if i am ) any ways here goes!
i have always had instability at 1.75 Vcore+ in bios setting now thats fine, the proc just doesnt like more then that, i can live with that....but here is where it gets sketchy! i originally had an 8rda, which overvolted, so at 1.75 it was really 1.76, with that i could hit a prime stable 2.4 GHZ, then i wanted a higher FSB, so i got a nf7, and that undervolted, so at 1.75 it was really 1.7ish, with taht i could get 2.3ish so damn, i should try 1.775 and see if its close to 1.75 because that is what's stable on my 8rda, but no! 1.775 IS NOT STABLE AT STOCK SPEEDS!!! so that makes me upset...its not the actual voltage, but rather the in bios setting..so then i get a DFI inifnity, BAM same thing...now im on a shuttle AN35 ultra, and SAME FREAKING THING!!! so here is my thoughts, please let me know if im on crack or something...
overvolt so when i set it to 1.75 in bios, it will be more like 1.8-1.9..i'd use a variable
resistor so i could change this as i see fit
BTW: its a 1700+ dlt3c jiuhb 0308 xpmw(or something like that, i know its x,p,m and w, but not sure what ordeR!) i think this chip has great potentual, since it hits 2.4 with 1.76
i have always had instability at 1.75 Vcore+ in bios setting now thats fine, the proc just doesnt like more then that, i can live with that....but here is where it gets sketchy! i originally had an 8rda, which overvolted, so at 1.75 it was really 1.76, with that i could hit a prime stable 2.4 GHZ, then i wanted a higher FSB, so i got a nf7, and that undervolted, so at 1.75 it was really 1.7ish, with taht i could get 2.3ish so damn, i should try 1.775 and see if its close to 1.75 because that is what's stable on my 8rda, but no! 1.775 IS NOT STABLE AT STOCK SPEEDS!!! so that makes me upset...its not the actual voltage, but rather the in bios setting..so then i get a DFI inifnity, BAM same thing...now im on a shuttle AN35 ultra, and SAME FREAKING THING!!! so here is my thoughts, please let me know if im on crack or something...
overvolt so when i set it to 1.75 in bios, it will be more like 1.8-1.9..i'd use a variable
resistor so i could change this as i see fit
BTW: its a 1700+ dlt3c jiuhb 0308 xpmw(or something like that, i know its x,p,m and w, but not sure what ordeR!) i think this chip has great potentual, since it hits 2.4 with 1.76