Help with wierd HD Issue that's not a HD problem

bbimber

n00b
Joined
May 15, 2006
Messages
4
I set up a media center PC and it's been working fine for about 4 months. One week ago I made a small change. I bought a new HD cage that allowed the addition of another drive and also happened to include a fan on the cage. I put the HD cage in, but did not add a new drive yet. I connected the fan to the chipset fan connector, since I have a passive NB cooler. I may or may not have installed the latest windows updates around that time too. I have 4 HDs, one system, one for TV and 2 for DVDs.

A couple days after the change, I would get live TV freezing. I looked in the event viewer and was getting a lot of disk errors. The errors were for one of the DVD HDs, not the one where i store TV. I tried re-installing my chipset drivers with the latest nVidia. This didnt work, so I replaced my system disk using a norton ghost image I created when i first setup my system. This didnt work, so I assumed this drive had gone bad, so I RMA'd it as it was under warranty. This didnt work either and i'm getting the same errors, this time on the replacement drive (i only get errors on this drive, not the other 3). I switched that drive to a different SATA port and I get the same errors on that drive. Does anyone have any ideas what to try next? Below are my system specs the errors from event viewer:

ASUS A8N-E, 1GB Corsair Value Select, AMD 3200+ Venice, Seasonic S12-430W, eVGA nVidia 6600, Hauppauge PVR500MCE, DVICO FusionHDTV5 Lite

Event Type: Error
Event Source: Disk
Event Category: None
Event ID: 11
Date: 5/16/2006
Time: 8:20:04 AM
User: N/A
Computer: HTPC
Description:
The driver detected a controller error on \Device\Harddisk4\D.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 0f 03 68 00 01 00 b6 00 ..h...¶.
0008: 00 00 00 00 0b 00 04 c0 .......À
0010: 03 01 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: e0 0e 00 00 00 00 00 00 à.......
0030: ff ff ff ff 06 00 00 00 ÿÿÿÿ....
0038: 40 00 00 00 00 00 00 00 @.......
0040: 00 20 0a 12 48 01 20 00 . ..H. .
0048: 08 00 00 00 0a 00 00 00 ........
0050: 94 a8 8c f7 28 bc 47 86 ?¨?÷(¼G?
0058: 00 00 00 00 d0 64 8b 85 ....Ðd??
0060: 00 00 00 00 00 00 00 00 ........
0068: 25 00 00 00 00 00 00 00 %.......
0070: 00 00 00 00 00 00 00 00 ........
0078: 00 00 00 00 00 00 00 00 ........
0080: 00 00 00 00 00 00 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........




Event Type: Warning
Event Source: Ftdisk
Event Category: Disk
Event ID: 57
Date: 5/16/2006
Time: 8:19:57 AM
User: N/A
Computer: HTPC
Description:
The system failed to flush data to the transaction log. Corruption may occur.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 01 00 be 00 ......¾.
0008: 02 00 00 00 39 00 04 80 ....9..?
0010: 00 00 00 00 85 01 00 c0 ....?..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........




Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 5/16/2006
Time: 8:25:23 AM
User: N/A
Computer: HTPC
Description:
Error code 100000d1, parameter1 0000002c, parameter2 00000002, parameter3 00000001, parameter4 f72e5438.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 64 100000d
0020: 31 20 20 50 61 72 61 6d 1 Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 32 63 2c 20 00002c,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 31 2c 20 66 37 32 65 01, f72e
0050: 35 34 33 38 5438



Thanks.
 
I would imagine then that it can really only be either a bad HDD, a bad cable, or a bad port. As long as youre not running RAID, I dont think drivers for mobo or anything could be the issue. Unless its not getting enough power, but that seems unlikely to me.
 
So if you run with 3 hd's, you get no errors whatsoever on the drive you were getting errors on?

If that's the case, you should try flashing your bios.
Make sure there's enough cooling in your case, 4 hd's is alot of heat. Also make sure you have a decent psu, 4 hd's is alot of power.
 
yes, 3HDs, no problems. I RMA'd the original bad HD, put the data back on and now i'm getting the same problems. this suggests that there's something about the data on the drive thats bad. can a virus cause this type of problem? i have AVG free and it detected a virus on a different drive, which it supposedly fixed. i have had viruses in the past that evaded detection from antivirus software though.
 
if you suspect you may still be infected, try this

housecall.trendmicro.com

Free online scan. The IE Plug-in will crash IE after install, but if you go back to the site, you'll be able to go right in and start the scan.

Have you swapped the cable yet?
Have you tried unplugging the fan on the cage from the chipset header?

I agree that a weak PSU could cause these sorts of intermittent, hard to track down problems. What are you running?
 
Seasonic S12-430 PSU, tried unplugging the fan and swapping the SATA cable. the PSU should be fine for this and the heat isnt a problem. all devices are well within acceptable temps. i really dont think power is a problem either, since i've got a good PSU and this exact same hardware was powered by it fine for 6 months before. also, a PSU problem would probably affect all disks equally, while this is specific to one.

i am now almost postive it's some type of virus data corruption - and i think it might have screwed up my drive. my RMA'd drive was fine until i moved the data from the original bad drive onto the replacement.

after not having luck with antivirus software, i decided to format the drive. it gets about 90% done then fails. i tried it in safe mode, same problem. i rebooted using my windows install CD and starting installing windows onto the new drive (just so that it would format without needing my OS) and it also crashed. at this point, i'm stumped. the drive will be warrantied from seagate, so i'm not worried about that as much. has anyone heard of a virus that can do this sort of thing or got an idea how to rescue the disk? thanks.
 
Id get a different hard drive, then install XP on it. Then plug in the problem drive, and try to format it in WIndows. You can also try some kind of zero-fill HDD formatting application, though I've never done so myself so I really can't recommend any. I would suggest checking the HDD manufacturers website for a low level formatting utility you could find a way to use before trying to install to this problem HDD.
 
Back
Top