Help with voltages on P5N32e-SLI

Tarz

n00b
Joined
Jan 22, 2007
Messages
2
Hi all,

Been reading this forum for a long time, and its inspired me to push my system to its limits. The only problem however, is that i'm a bit of a newbie when it comes to OC'ing. I got my e6300 up to 2.4GHz so far and thats not a bad start, but all my voltages are set on auto and I know thats not the way to do it. So any help with voltage settings you can give me would be very much appreciated, my system specs are in my sig but if you need any more info please just ask. Thanks in advance :)
 
You should start out on your stock voltage for the cpu. Once you have the stock voltage you can up the FSB until you reach an unstable fsb. When you do up the voltage a little and try again.

That is the very very basic way. You can also check the Intel section and see what others with a similar setup are at so you can get a general idea of where you are headed.
 
What about northbridge and southbridge voltages? Can I leave those on automatic also? or should they be set according to the overclock? Thanks :)
 
I am actually not sure about those. I think I left mine on auto :confused: I am still learning just like you :p
 
Back
Top