nlancaster
Gawd
- Joined
- Feb 24, 2005
- Messages
- 700
So I received a used SD37P2 motherboard for $20 bucks. I didn't realize that they used propretary everything!!
The actual board is a FD37 Rev 1.2
Does anyone that has a Shuttle XPC P2 series case know, or can check for me, the pinout on the power supply, and the front panel header. There are a few headers but they are not marked for pinout at all. And of course shuttle doesnt have any kind of documentation available that shows what the pinouts are.
Any help would be appreciated.
ATX1 = 6pins
ATX2 = 8pins
USB3 = 5 pins in a single row
JP5 = thin ribbon connector with 24 or 48 pins
JP6 = 9 pin header looks like it might be the front panel header.
Large Version of below image.
The actual board is a FD37 Rev 1.2
Does anyone that has a Shuttle XPC P2 series case know, or can check for me, the pinout on the power supply, and the front panel header. There are a few headers but they are not marked for pinout at all. And of course shuttle doesnt have any kind of documentation available that shows what the pinouts are.
Any help would be appreciated.
ATX1 = 6pins
ATX2 = 8pins
USB3 = 5 pins in a single row
JP5 = thin ribbon connector with 24 or 48 pins
JP6 = 9 pin header looks like it might be the front panel header.
Large Version of below image.