Help with overclocking Gigabyte GA-EP45-UD3R

[piratepress]

Just recently I got a Gigabyte GA-EP45-UD3R, E8500 and G.SKILL 4GB DDR2 1000 (PC800) memory. My old system was a Gigabyte EP35, E8400 and 4GB A-DATA. I set the multiplier on it to 9x400 and got 24/7 rock-solid 3.6GHz. However, my new system won't even accept 3.5GHz without a blue screen when Windows loads that says "Page Fault in Non-Paged Area."

I know with the faster processor and better memory I shouldn't have any trouble hitting 3.6 (9x400). Can anyone here who has a similar Gigabtye board give me some suggestions on what to change in the BIOS to help with overclocking? Thanks in advance!

 

[Mega666]

unlink the ram and run it at stock speed and voltage if you are not doing so already.

 

[engiNURD]

Make sure your RAM multiplier is set to 2.0x, and your DRAM Voltage is set to 1.9v. There's a huge DS3 thread around here somewhere by BillParish that should help, since the BIOS on the UD3R is similar.