Help with overclock, not sure whats stalling me.

zidion

Limp Gawd
Joined
Jun 20, 2002
Messages
427
Ive been OCing my system lately and something keeps making it freeze. Ive been testing stuff out and I am pretty sure its my ram. For example, ill run orthos, and when I do a CPU test everything is good. But if I do a ram test, it freezes on me.

These are my settings in my bios:

fsb- 400
ram-auto
PCIe-100
PCI-33.3
memory voltage-2.1
vcore- 1.375
NBvoltage-1.55

Now, if I set my ram to DDR800 (making it 1:1) my computer will load, but crashes much faster (like 30seconds into Orthos). But if leave to auto it turns it to DDR600 but doesnt seem to cause any problems. Also, if I config the timings for my ram in the bios (from auto to 4-4-4-12) it wont even post.

So I am thinking that either my ram doesnt want to do 800, or its not getting enough voltage. I am not sure how much to raise it though. Everything else seems pretty cool (cpu is 50c at full load).

Any help or opinions would be awesome!

::edit:: I use to run @ 380 with everything on auto on air and never had any problems. And it use to get to like 80c.
 
Back
Top