• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help with new intel build

S

shiv

Limp Gawd
Joined
Nov 2, 2006
Messages
142
I've been out of the loop for several months and am building a lower-mid priced rig to do some gaming. I have picked up a P5Q Pro motherboard this week and just grabbed a E8200 at Microcenter today for $99. I'm not sure what my basic overcoocking settings should be and if I should get 4gb of ddr2 1066 or 800 for the chip I got. Any suggestions will be greatly appreciated.
(FWIW the rest of my system is a Corsiar 620 psu, WD 640gb, Asus P5Q Pro, Xigmatek Dark Knight, and will be buying the memory and a XFX 4890 this week for gaming at 1080p on my 61 tv. )
 
The E8200 has an 8x multiplier, so you'll want at least DDR2-1000 or DDR2-1066 RAM to get the most out of your chip, like Jospeh suggested. Overclocking should be fairly simple; just raise your FSB, and your voltages to go along with it when necessary. As long as you're not aiming for anything too crazy, that should be enough. If you need any specific help once you've got everything together, just start a thread and someone will walk you through it.
 
You must log in or register to reply here.
Back
Top