Help with a e4300 build

becknoyes

n00b
Joined
Jan 28, 2007
Messages
3
I have the following components that I'm putting together:
  • Mobo: Gigabyte GA-965P-S3
  • Proc: Intel E4300 w/ scythe ninja
  • RAM: 2 1024MB OCZ PC2 5400 Gold 667
  • Video: Sapphire Radeon X800 GTO2 256mb
  • Case: Antec P150

I've placed all the parts on the mobo and into the case, but nothing happens on the monitor when I power it on. There are no beeps, but all fans arespinning, and the led light is lit.

I've tried swapping out video cards and hard drives, but get the same results.

While I have experience with installing hardware, I've never put together an entire machine.
What could I be doing wrong here? Are there any issues with compatibility or could I have a faulty board or processor? Any advice is appreciated.
 
connect only the mobo/cpu(+hsf)/ram(single stick only)/vidcard/monitor/psu... all on top of the mobo cardbard box. if you still see nothing, remove the ram, and try again. if you hear beeps (make sure a speaker is plugged in), then you know your board is working. if you don't hear beeps, you may need more voltage for that ram, or it may be the motherboard. to rule out the cpu, re-seat it and try again. cpu's hardly ever come doa.
 
For the power, the P150 comes with a 430W Antec Neo HE430 pre-installed with the case.

enginurd, so you're saying once I take the mobo out, I shouldn't even connect the case wires to the board( led's and other switches)?
 
For the power, the P150 comes with a 430W Antec Neo HE430 pre-installed with the case.

enginurd, so you're saying once I take the mobo out, I shouldn't even connect the case wires to the board( led's and other switches)?

you only need the speaker. use a screwdriver to short the two power leads to turn the system on (same amount of time you'd push a power button).
 
A few more questions before I take out the MB to test:
1) Is it possible that the Gigabyte MB won't work with the e4300 out of the box, and needs to be flashed to a more current version?
2) I'm using a HD with a previous install of winXP - this wouldn't be the reason the system won't POST?
3) Is the RAM I'm using fast enough at 667?

Thanks again for all the help.
 
Back
Top