• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Help trying to understand the oc the memory.

A

Airbrushkid

2[H]4U
2FA
Joined
Aug 27, 2007
Messages
2,572
Ok I have two GTX 980 SC reference cards.

I drop the power to 80%

Set Fan speed at 70%

Under clock the GPU to -100 mhz

Over clock the memory to anywhere from 250 mhz to 400 mhz.

I doesn't affect the dag hash speed which is 34.456 stock roughly. SOL is 541.00 This total for both cards.

Nicehash calculator says the Hash for one card should be 20.28 mh per card. And sol should be 312.12 per card. So 2 cards should be 40.56 mh dag, 624.24 for sol?

So what am I missing?
 
I have a pair of 980Ti's and Nicehash is running at 805 Sols/s and 71 MH/s. The Nicehash calculator is showing 461 Sol/s and 36.91 MH/s so I'm slightly under-performing as well.

My settings are:

Power 70%
Core 0 MHz
Memory +500 MHz

I'm sure the Nicehash calculator is based on running the cards at 100% power.

You did enable the P0 State option in Nicecash, right?
 
P0 state force the GPU to work in the highest power state. When enabled, you will notice NiceHash runs a bat file when it starts, to enable this on the graphics card(s).

I found that without having P0 enabled, I was unable to save higher memory speed settings in Afterburner.
 
You must log in or register to reply here.
Back
Top