HELP!!!! Problems with Soltek mobo

takeabao

Limp Gawd
Joined
Jul 10, 2004
Messages
359
Okay guys, so here's my problem:

I just built my somewhat-new rig using a Soltek SL-865-Pro2 motherboard (865 PE chipset) which uses an AMI bios. I also have 2 x 256MB Corsair XMS PC3200. I'm still awaiting the arrival of my 5950 Ultra, but last night, I thought I'd go ahead and fire up the computer using my old Viper V770 Ultra (nVIDIA TNT 2 chipset) graphics card. I plug everything in, hit the switch and what's weird is... everything turns on for 2 seconds...then turns off. After about 2 more seconds, it turns on again all by itself. Btw, I'm using a Fortron 300w PSU (18A on +12 line). The motherboard continues to post until it finally gets to what the mobo LCD reads as error "2C" (on the POST code checkpoint list) which in the manual is described as "Initializes different devices. Detects and initializes video adapter installed in the system that have optional ROMs." In addition, the motherboard continuously beeps. I can't really describe it as one longgg beep or just a bunch of shorter ones since it's hard to tell.

So I'm thinking to myself, well gee, that card is old, maybe it's dead. I still have yet to try another card (my neighbor has a 9800XT that he might lemme try on it).

Based on my symptoms, do ya'll think it's my motherboard that's giving me issues (I'd REALLY hate to have to RMA since I'd have to take EVERYTHING out) or is it something else?

Any help, advice, etc. is greatly appreciated. Thanks in advance.

_Ray
 
I think the TNT 2 Ultra is a 3.3 volt card and not a 1.5v. You may have damaged the card and or motherboard with that.

You need to get ahold of a modern card and give it a try.
 
Sir-Fragalot said:
I think the TNT 2 Ultra is a 3.3 volt card and not a 1.5v. You may have damaged the card and or motherboard with that.

You need to get ahold of a modern card and give it a try.

I guess one thing that's noteworthy is that...when I take out the card...and turn everything on...it gives mt the same error message. So in a way, I guess that isolates that old card as the problem, right?

Now, what I'm worried about is that old card f***ing up my motherboard.... what're the odds of that happening?
 
Bump.

I did some research away from the hardforum and it appears that a lot of people have indeed fried their motherboards doing what I did *sigh* However, my motherboard still turns on and attempts to go thru the POST process (until it reaches 2C because I have no graphics card) so it appears that there must be some feature that disabled giving any power to the TNT2 when it was plugged in, in order to prevent damage. I've heard of these features on newer motherboards so I'm crossing my fingers and hoping that this is indeed the case.

Any other insight [h]ardforum-ers?
 
Back
Top